Panasonic TYTP42P6S TYTP42P6S User Guide - Page 30

Specifications Model Number TY-TP42P6-S TY-TP50P6-S Type Optic Touch Panel Power Source Voltage DC + 5 V ± 10 % Electric current DC + 5 V Max 400 mA under Supply system from USB Bus Power (DC + 5 V Max 500 mA) Touch Panel Detection system Infrared obstruction detection system Panel window (W × H) 928.5 mm × 526.5 mm (36.55 ″ × 20.73 ″) 1,118 mm × 632 mm (44.02 ″ × 24.88 ″) Detection range (W × H) 916 mm × 516 mm (36.06 ″ × 20.31 ″) 1,100 mm × 620 mm (43.31 ″ × 24.41 ″) Effective detection range Detection range + 1.0 mm (0.04 ″) at the top, bottom, left and right Operating modes Detection operation at input point, during initial movement and at end point ∗1 Resolution (W × H) 1,833 × 1,033 ∗1 2,201 × 1,241 ∗1 Detection pitch 2.0 mm × 2.0 mm (0.08 ″ × 0.08 ″) Output system Coordinate output Number of optic elements (W × H) 230 × 130 elements 276 × 156 elements Optic element pitch (W × H) 4.0 mm × 4.0 mm (0.16 ″ × 0.16 ″) Minimum stylus size (W × H) 6.0 mm × 6.0 mm (0.24 ″ × 0.24 ″) Scan speed Initial touch: 30 ms/frame max.; during movement: 8 ms/frame max. Touch pen Infrared system USB Interface (USB 1.1) Terminal No. and Signal name (TYPE B) -DATA 2 1 Vcc USB cable length: 2 m (6.56 ft) 21 34 +DATA 3 4 GND Temperature When operating: 0°C (32°F) to 50°C (122°F) (temperature gradient 25°C (77°F)/hr max.) ∗2 When not operating: -10°C (14°F) to 60°C (140°F) temperature gradient 25°C (77°F)/hr max. Humidity When operating: 20% to 85% (must be no condensation) ∗2 When not operating: 10% to 95% Resistance to extraneous light Lateral light: 2,000 lx MIN +20% (angle of incidence: 20°) Frontal light: 10,000 lx MIN +20% (angle of incidence: 90°) Panel form Flat panel (Flat type) External dimensions (W × H × T) 1,066 mm × 634 mm × 69 mm 1,256 mm × 748 mm × 69 mm (41.97 ″ × 24.96 ″ × 2.72 ″) (49.45 ″ × 29.45 ″ × 2.72 ″) (Excluding mounting brackets) (Excluding mounting brackets) Weight 3.5 kg (7.7 lbs) Excluding mounting brackets 4.2 kg (9.3 lbs) Excluding mounting brackets Extruded material Aluminum Notes: ∗1 When it is used with exclusive driver software. ∗2 This applies to the touch panel alone. When the panel is attached to a device such as a PDP, follow the environmental conditions for the device being used. 30