Panasonic TYTP42P6S TYTP42P6S User Guide - Page 5
MAINTENANCE, IF SOMETHING ABNORMAL HAPPENS, If the equipment starts to smoke or emit a strange odor
View all Panasonic TYTP42P6S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Warnings and precautions Maintenance ∗ Be sure to unplug the USB cable before cleaning the equipment. Clean the inside of the equipment once a year. • The equipment is of semi-sealed construction, so dust may eventually accumulate inside. This may cause poor operation due to a reduction in the level of infrared light available for touch detection. Cleaning frequency will vary depending on the setup location; if in doubt consult the dealer from whom you purchased the equipment. • Be careful not to touch the infrared transmissive area on the screen of the plasma display and rub the screen with excessive force. Cleaning of the infrared transmissive area • Once a day, use a soft cloth to wipe off any soiling or debris on the infrared transmissive area. Failure to do so will cause a malfunction, but on such an occurrence you can restore normal function simply by gently wiping the soiling off. If soiling is severe, wet a cloth in household detergent diluted in water, wring well, wipe off the soiled part, and then wipe well with a dry cloth. • Be aware that if you apply volatile fluids such as thinner, benzene or insecticide, or allow long-term contact with products containing materials such as rubber or vinyl, the surface of the equipment may discolor or deform. Also, be careful of wiping with chemically-treated cloths, because such action may cause similar to happen. If something abnormal happens If the equipment starts to smoke or emit a strange odor • It is extremely dangerous to continue using the equipment in such a malfunctioning state. Immediately unplug the USB cable from the computer, and request repair from the dealer from whom you purchased the equipment. 5