Panasonic VDRD200 Dvd Camcorder-english/spanish

Panasonic VDRD200 - DVD CAMCORDER Manual

Panasonic VDRD200 manual content summary:

  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 1
    Instructions DVD Video Camera Model No. VDR-D200 VDR-D100 Before using Card slot Computer software VDR-D200 µ µ VDR-D100 - - -: Not available Setup Recording Playback Before connecting, operating or adjusting this product, please read the instructions completely. Spanish Quick Use Guide
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 2
    No. Model No. Serial No. Safety Precautions WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. CAUTION: TO PREVENT FIRE OR SHOCK HAZARD AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 3
    this equipment. Declaration of Conformity (U.S.A. only) Trade Name: Panasonic Model No.: VDR-D100/VDR-D200 Responsible party: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Support Contact: Panasonic Consumer Electronics Company 1-800-211-PANA (7262) This
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 4
    in accordance with the manufacturer's instructions. 8) Do not install near apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 5
    to disassemble this unit. There are no user serviceable parts inside. Unplug your camera from the power supply before cleaning. CAUTION ≥ DO NOT AIM YOUR recordings due to malfunction or defect of this unit, its accessories or recordable media. IMPORTANT ∫ Carefully observe copyright laws Whatever
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 6
    trademarks of Dolby Laboratories. ≥ Microsoft®, Windows® and DirectX® are either registered trademarks trademarks of the Intel Corporation. ≥ Macintosh, Mac OS and QuickTime are trademarks of Apple Computer, These operating instructions are designed for use with models VDR-D200 and VDR-D100. Pictures
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 7
    that can be used on this unit . . . . . 19 Cards that you can use with this unit (VDR-D200 only 22 Disc and card handling 23 Setup Power supply 24 Charging the battery 24 Connecting to the AC outlet 26 Turning the unit on/off 26 Inserting/removing a disc 27 Inserting/removing an SD card
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 8
    98 End User License Agreement 100 Installation (Windows 101 Installing DVD-RAM Driver 101 Installing DVD-MovieAlbumSE 103 Installing DVDfunSTUDIO 104 Reading the operating instructions of the software applications 105 Software application uninstallation . . . . 105 Connection and recognition
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 9
    ! (l 66, 70) You can create an original video (playlist) by collecting your favorite scenes together and then easily record (dub) this video to a VCR or a DVD recorder hard disk. 9 LSQT0969
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 10
    scenes recorded with this unit on it. If you have a DVD recorder with hard disk, you can copy (dub) scenes recorded on a disc with this unit to the hard disk. ∫ Using with a computer! (VDR-D200 only) (l 95) You can enjoy editing scenes with the software on the supplied CD-ROM and creating original
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 11
    Quick Guide Quick Guide ∫ Charging the battery 1 Connect the AC cable to the AC adaptor and the AC outlet. 2 Put the battery on the battery mount by aligning the mark, and then securely plug it in. ∫ How to turn on/off the power While pressing the button A, set the OFF/ ON switch to ON/OFF. A ∫
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 12
    Quick Guide ∫ Inserting/removing an SD card (VDR-D200 only) 1 Open the card slot cover. ∫ Recording still pictures (VDR-D200 only) ≥ Rotate the mode dial to select . 2 Insert/remove the SD card into/from the card slot. Press the PHOTO SHOT button. 3 Securely close
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 13
    Before using ∫ Motion picture playback ≥ Rotate the mode dial to select . ∫ Still picture playback (VDR-D200 only) ≥ Rotate the mode dial to select Quick Guide . 1 Select the scene to be played back. 1 Select the file to be played back. 2 Press the joystick. 3 Move the joystick to operate. 2
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 14
    the accessories before using this unit. Battery pack CGA-DU12 Shoulder strap VFC3506-1A AC adaptor PV-DAC14D USB cable K1HA05CD0014 DC cable K2GJ2DC00011 AC cable K2CA2CA00029 or K2CA2CA00025 AV/S cable K2KZ9CB00001 CD-ROM (VDR-D200 only) LSFT0643 ≥ (For VDR-D100 only) You can download the
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 15
    Audio-video output terminal [A/V] (l 89, 92) 6 Video light (VDR-D200 only) (l 54) 7 USB terminal [ ] (l 93, 106) 8 Viewfinder (l 18, Video light button [LIGHT] (VDR-D200 only) (l 54) 11 DC input terminal [DC/C.C. IN] (l 26) 12 Recording start/stop button (l 41) 13 Power switch [OFF/ON] (l 26
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 16
    on the LCD monitor screen. 29 31 However, this is not a malfunction and does not affect the recorded picture. 30 Mode select switch [AUTO/MANUAL/FOCUS] (l 55) 31 Speaker 32 Disc eject lever [DISC EJECT] (l 27) 33 Disc/computer access lamp [ACCESS/PC] (l 27, 107) 34 Disc compartment (l 27
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 17
    loop made by itself and pull tight. Tripod receptacle This is a hole for attaching the unit to the optional tripod. (Please carefully read the operating instructions for how to attach the tripod to the unit.) ≥ When the tripod is used, the card slot cover cannot be opened. Insert an SD card
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 18
    Parts identification and handling Using the LCD monitor You can record the image while viewing it on the LCD monitor. 1 Press the PUSH OPEN button. The LCD monitor opens slightly. Pull the LCD monitor out in the direction of the arrow. ≥ The viewfinder is now deactivated. ≥ It can open up to
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 19
    after finalizing - ¥ ¥*6 - ¥: available -: not available *1 By formatting the disc, it can be used repeatedly. (l 83) *2 DVD players and DVD recorders that support 8 cm (3") discs. *3 Playback is possible on compatible products. *4 Playback is possible on compatible products. (May have to be
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 20
    with no problems. However, some commercially available discs do not meet the DVD standard for quality and performance. If you use one of these discs, you may not be able to record or playback normally. (The message "RECOMMENDED TO USE PANASONIC DISC" appears.) Refer to the following support site for
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 21
    unit, the screen on the right appears. Select [YES], then press the joystick. 2 Select format type, then press the joystick. VIDEO: DVD-Video format VR: DVD Video Recording format 3 When the confirm screen appears, select [YES], then press the joystick. ≥ To change the format type, format the disc
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 22
    the following website. (This website is in English only.) http://panasonic.co.jp/pavc/global/cs/e_cam ≥ For the purposes of these operating instructions, SD Memory Card and miniSD™ Card are referred to as the "SD card". ≥ This unit supports SD cards formatted in FAT12 system and FAT16 system based
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 23
    Before using Disc and card handling ∫ How to hold a disc or card Do not touch the recorded surface or the terminal surface. Discs and cards ∫ If there is dirt or condensation on the disc Wipe with a damp cloth and then wipe dry. ∫ Handling precautions ≥ Be careful about scratches and dirt. ≥ Do
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 24
    Power supply Power supply Charging the battery When this unit is purchased, the battery is not charged. Charge the battery before using this unit. ≥ If the DC cable is connected to the AC adaptor, then the battery will not charge. Remove the DC cable from the AC adaptor. 1 Connect the AC cable
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 25
    the recordable time when the viewfinder is used. The times in parentheses indicate the recordable time when the LCD monitor is used. (When using a DVD-RAM disc) Battery model number Voltage/capacity Recording mode Maximum continuously recordable time XP 1 h 50 min (1 h 40 min) Supplied
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 26
    Power supply Connecting to the AC outlet 1 Connect the AC cable to the AC adaptor and the AC outlet. 2 Connect the DC cable to the AC adaptor. 3 Connect the DC cable to this unit. ≥ Do not use the AC cable for other equipment since the AC cable is exclusively designed for this unit. Do not use the
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 27
    /removing a disc Inserting/removing a disc When inserting or removing the disc, fit the charged battery pack or connect the AC adaptor to the unit. The cover of the disc compartment will not open unless the unit is powered. 1 Slide the DISC EJECT lever once and release it. A few moments after the
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 28
    "SIDE B" recording/playback side is the "SIDE A" marked side. "SIDE A" mark DVD-RAM / SIDE A The opposite side is the "SIDE A" recording/ playback side. scratched. ≥ Do not remove the battery pack or disconnect the AC adaptor while removing the disc or until power is completely turned off. If you
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 29
    card (VDR-D200 only) Inserting/removing an SD card (VDR-D200 only) Before inserting/removing an SD card, be sure to turn off the power. If the SD card is inserted or removed with the power turned on the OFF/ON switch or the mode dial - Removing the battery or disconnecting the AC adaptor 29 LSQT0969
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 30
    pictograph to the position shown in the illustration. Disc recording mode (l 41) Disc playback mode (l 61) Card recording mode (l 43) (VDR-D200 only) Card playback mode (l 64) (VDR-D200 only) Use this to record motion pictures on a disc. Use this to play back motion pictures on a disc. Use this to
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 31
    In the disc playback mode or the card playback mode, the icons will be automatically displayed on the screen.) Disc recording mode (AUTO/MANUAL/FOCUS switch is set to AUTO) A: The operation icon is off. A Icon - ª Direction 4 Soft skin mode Function 2 Fade 1 Backlight compensation Page 47
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 32
    white balance adjustment mode is selected) White balance Shutter speed Iris or gain value White balance mode selection, manual adjustments Page 47 48 50 59 58 60 60 57, 58, 60 Disc playback mode A: The operation icon is off. A Icon 1/; ∫ : - 2; 9 ;1 Direction 3 4 2 1 Function Playback/pause
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 33
    the joystick A Icon - Ø ª Direction 4 2 1 Function Soft skin mode Self timer Backlight compensation Card recording mode (VDR-D200 only) (AUTO/MANUAL/FOCUS switch is set to MANUAL) A: The operation icon is off. Page 47 51 50 A Icon (1/2) Ø ª (2/2) s r Direction 4 2 1 3 4 21 Function Soft
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 34
    off. Icon ∫ - E D Direction 4 2 1 Function Stop playback and show thumbnails Playback previous picture Playback next picture Card playback mode (VDR-D200 only) (When [SLIDE SHOW] is selected) A: The operation icon is off. Icon 1/; ∫ - E D Direction 3 4 2 1 Function Slide show start
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 35
    Switching the language Switching the language You can switch the language on the screen display or the menu screen. 1 Press the MENU button, then select [ LANGUAGE] and press the joystick. 2 Select [English] and press the joystick. Setup 35 LSQT0969
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 36
    Using the menu screen Using the menu screen Refer to "Menu list" (l 125) for information about the menus. 1 While stopped, press the MENU button. The menu displayed differs depending on the position of the mode dial. ≥ Do not switch the mode dial when the menu is displayed. MENU 2 Move the
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 37
    5 Move the joystick right or press the joystick. 6 Move the joystick up or down in order to select the desired item. 7 Press the joystick to enter the selection. Using the menu screen To get back to the previous screen Move the joystick left. To exit the menu screen Press the MENU button. ≥ The
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 38
    when this unit is turned on, then the built-in lithium battery runs down. After charging the battery using the steps below, set the clock. Connect the AC adaptor to this unit or place the battery on this unit, and the built-in lithium battery will be recharged. Leave this unit as is for approx
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 39
    Adjusting LCD monitor/viewfinder Adjusting LCD monitor/viewfinder Adjust the brightness and color level. 1 Press the MENU button, then select [ SETUP] # [ LCD SET] or [ EVF EVF SET] # [YES] and press the joystick. 2 Move the joystick up or down to select the item to be adjusted. Then, move the
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 40
    Recording Before recording Before recording Basic camera positioning 1 Recording 4 2 3 5 1 Hold the camera with both hands. 2 Run your hand through the grip belt. 3 Do not cover the microphones or sensors with your hands. 4 Keep your arms near your body. 5 Slightly open your legs. ≥ When you
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 41
    (l 127, POWER SAVE) ≥ The maximum number of scenes on a disc (per side): 999 (Even if there is remaining capacity for recording on a disc, you may not be able to record 999 scenes.) ≥ While "WRITING THE INFORMATION ON THE DISC." is displayed, do not disconnect the AC cable or remove the battery as
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 42
    elapsed SP 0h00m10s A R 0h02m B C ≥ While motion picture recording is in progress, do not disconnect the battery or AC adaptor. If you do, a repair disc message may be displayed when the power is turned back on. (l 131, About recovery) Immediately after recording finishes the ACCESS/PC lamp lights
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 43
    Recording still pictures (VDR-D200 only) Recording still pictures (VDR-D200 only) Record the still picture on an SD card. (SD) 1 Remove the lens cap, then turn the unit on. If the unit is turned
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 44
    Recording still pictures (VDR-D200 only) ∫ To record still pictures clearly When zooming in on the subject with a magnification of 4k or higher, it is difficult to reduce the
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 45
    Various recording functions Various recording functions Zoom in/out function You can zoom in up to 30k optically. (RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD) ¬ Rotate the mode dial to select or . Move the zoom lever. T side: To bring distant people or objects appear closer for recording (zoom in) W side
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 46
    Recording Various recording functions To use the zoom microphone function (RAM) (-RW‹VR›) (-RW‹V›) (-R) Interlocked with the zooming operation, the microphone will collect sounds clearly far away with the tele-shot or those in the vicinity with the wide-angle shot. ¬ Rotate the mode dial to select
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 47
    Various recording functions Soft skin mode This makes skin colors appear softer for a more attractive appearance. (RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD) This is more effective if you record the bust image of a person. ¬ Rotate the mode dial to select or . 1 Press the joystick to display the icon shown
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 48
    Various recording functions Fade in/fade out function Fade in: The image and audio gradually appear. Fade out: The image and audio gradually disappear. (RAM) (-RW‹VR›) (-RW‹V›) (-R) ¬ Rotate the mode dial to select . To fade in 1 While recording is paused, press the joystick to display the icon
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 49
    3 Press the recording start/stop button. Pause recording. (fade out) The image/audio gradually disappears. After the image/audio completely disappears, recording stops. Various recording functions To cancel fading Select [ ] again. To select the color for fade in/out The color which appears in
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 50
    Recording Various recording functions Backlight compensation function This is for protecting a backlit subject from being darkened. (RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD) Use this function when the light is emanating from behind the subject and the subject appears dark. ¬ Rotate the mode dial to select
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 51
    Various recording functions Self-timer recording (VDR-D200 only) This is for recording shots of yourself as well. You can record still pictures on an SD card using the timer. (SD) ¬ Rotate
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 52
    and press the joystick. ≥ Images played back vary depending on the TV connected. Please refer to the operating instructions for your TV. ≥ When images are played back on a TV screen, the date display may be erased not be displayed correctly, depending on the software used. Recording 52 LSQT0969
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 53
    ] # [ MAGICPIX] # [ON] and press the joystick. After exiting the menu screen, the unit is in manual focus mode. Move the joystick left or right to bring the subject into focus manually. (l 57) ≥ If the manual focus indication is not displayed, press the joystick twice and then focus the subject. To
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 54
    Various recording functions Recording with the video light (VDR-D200 only) This built-in video light is r ≥ The subject should be within 1.5 m (5 feet) of the unit. ≥ Using the video light reduces battery time. ≥ Set the video light to off when not in use. ≥ Do not look directly into the light.
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 55
    speed ≥ Iris/gain value ≥ Focus Above settings may not be adjusted automatically depending on light sources or scenes. If so, adjust the settings manually. Scene mode This is for recording in various situations. (RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD) When you record images in different situations, this
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 56
    button, then select [ BASIC] # [ SCENE MODE] # [OFF] and press the joystick. ≥ You can also cancel the scene mode function by setting the AUTO/MANUAL/FOCUS switch to AUTO. Sports mode ≥ For slow-motion playback or playback pause of recorded pictures, this mode helps diminish camera shake. ≥ During
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 57
    in focus when zoomed in. First, zoom in on the subject, and then focus on it. To restore to the automatic adjustment Press the AUTO/MANUAL/FOCUS switch down again to the FOCUS position. ≥ You can also restore the auto focusing by setting the AUTO
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 58
    colors depending on the scenes or lighting conditions. If so, you can adjust the white balance manually. ¬ Rotate the mode dial to select or . 1 Set the AUTO/MANUAL/FOCUS switch to MANUAL. MNL The icon shown in the illustration is displayed automatically. 2 Move the joystick down to select
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 59
    . Do not cover the white balance sensor during recording, or it may not function properly. A ≥ When the [ ] display flashes white, the manual white balance previously adjusted is stored. Whenever recording conditions change, re-set the white balance for correct adjustment. ≥ When the unit is turned
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 60
    [CLOSE] darken the image. ≥ Value closer to [18dB] brighten the image. ≥ Values with [dB] are gain values. To restore to automatic adjustment Set the AUTO/MANUAL/FOCUS switch to AUTO. ≥ When setting both the shutter speed and the iris/ gain value, set the shutter speed and then set the iris/gain
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 61
    on the screen. A B 12. 15. 2006 4 Move the joystick to operate. 1/;: Playback/Pause : (Move): Skip playback (backward) : (Move and hold): Review playback 9 (Move): Skip playback (forward) 9 (Move and hold): Cue playback ∫: Stops the playback and shows the thumbnails. ≥ During playback, the
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 62
    Motion picture playback Slow-motion playback 1 Move the joystick up during playback to pause the playback. 2 Move and hold the joystick right. (Slow-motion pictures will be played back in reverse when you move and hold the joystick left.) ≥ Normal playback is restored when you move the joystick up.
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 63
    RW‹V›) (-R) - When the disc is removed (-RW‹V›) (-R) - When the disc is repaired (-RW‹V›) (-R) - When the mode dial is switched (-R) - When the power is turned off (-R) Resuming the previous playback Press the MENU button, then select [ PLAY SETUP] # [ RESUME PLAY] # [ON] and press the joystick. If
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 64
    D200 only) Still picture playback (VDR-D200 only) 1 Rotate the mode dial to select . The still pictures recorded on the SD card are displayed as thumbnails. (SD) 2 Select the file to
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 65
    Still picture playback (VDR-D200 only) Playing back still pictures as a slide show Press the MENU button ) established by JEITA (Japan Electronics and Information Technology Industries Association). ≥ The file format supported by this unit is JPEG. (Not all JPEG formatted files will be played back.)
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 66
    scenes Editing scenes Deleting scenes This is for deleting scenes recorded on discs. The deleted scenes cannot be restored. ≥ Scenes on DVD-RW (Video format) and DVD-R cannot be deleted. Deleting scenes one at a time ¬ Rotate the mode dial to select . 1 Press the button during playback. (RAM) (-RW
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 67
    are many scenes on the disc. ≥ Do not turn off this unit while deleting. Editing scenes ≥ When you delete scenes, use a battery with sufficient battery power or use the AC adaptor. ≥ It may not be possible to delete scenes that have been divided. Combine the divided scenes, and then delete them
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 68
    Editing scenes Dividing a scene This is for dividing a scene into two. (RAM) (-RW‹VR›) To delete unnecessary portion of scene, first divide the scene, and then delete the unnecessary portion. ¬ Rotate the mode dial to select . 1 Press the MENU button, then select [ EDIT SCENE] # [ DIVIDE] and press
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 69
    Editing scenes Combining scenes This function is only for combining two consecutive scenes into one. ¬ Rotate the mode dial to select . (RAM) (-RW‹VR›) 1 Press the MENU button, then select [ EDIT SCENE] # [ COMBINE] and press the joystick. 2 Select the scene to be combined, then press the
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 70
    Using playlists Using playlists What is a playlist? You can create a playlist by gathering your favorites from the recorded scenes. Since the playlist is not created by copying data, you will consume little of the disc capacity by making a playlist. ≥ If you create or delete playlists, the original
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 71
    Creating a new playlist ¬ Rotate the mode dial to select . 1 Press the MENU button, then select [ PLAY SETUP] # [ PLAY MODE] # [PLAYLIST] and press the joystick. Using playlists (RAM) (-RW‹VR›) 2 Select [CREATE], then press the joystick. 3 Select the scene to be added to the playlist, then press
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 72
    Using playlists Playing back a playlist ¬ Rotate the mode dial to select . 1 Press the MENU button, then select [ PLAY SETUP] # [ PLAY MODE] # [PLAYLIST] and press the joystick. (RAM) (-RW‹VR›) 2 Select the playlist to be played back, then press the joystick. Scenes in the selected playlist are
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 73
    Editing a playlist Editing scenes on a playlist will not affect the original scenes. Adding scenes to playlist ¬ Select playlist playback mode. (l 72, steps 1 and 2) 1 Press the MENU button, then select [ EDIT] and press the joystick. Using playlists (RAM) (-RW‹VR›) 2 Select the playlist to be
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 74
    Using playlists Moving scenes The scenes in a playlist can be moved. ¬ Select playlist playback mode. (l 72, steps 1 and 2) 1 Press the MENU button, then select [ EDIT] and press the joystick. 2 Select the playlist to be edited, then press the joystick. 3 Select [ MOVE], then press the joystick. 4
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 75
    Dividing a scene You can divide a scene into two parts. ≥ Dividing scenes on a playlist will not affect the original scenes. ¬ Select playlist playback mode. (l 72, steps 1 and 2) 1 Press the MENU button, then select [ EDIT] and press the joystick. Using playlists 2 Select the playlist to be
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 76
    Using playlists Combining scenes Two scenes can be combined into one. ≥ Combining scenes on a playlist will not affect the original scenes. ¬ Select playlist playback mode. (l 72, steps 1 and 2) 1 Press the MENU button, then select [ EDIT] and press the joystick. 2 Select the playlist to be edited,
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 77
    Deleting scenes ≥ Deleting scenes on a playlist will not affect the original scenes. Deleting scenes one at a time: ¬ Select playlist playback mode. (l 72, steps 1 and 2) 1 Press the button during playback. Using playlists 2 When the confirmation message appears, select [YES], then press the
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 78
    Using playlists 5 (Only when [SELECT] is selected in step 3) Press the button. 6 When the confirmation message appears, select [YES], then press the joystick. (Only when [SELECT] is selected in step 3) To continue deleting other scenes Repeat steps 4-6. To complete editing Press the MENU button.
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 79
    Editing still pictures (VDR-D200 only) Editing still pictures (VDR-D200 only) Deleting still pictures This is for deleting still picture files recorded on SD cards. The deleted files cannot be restored. (SD) Deleting files
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 80
    Editing still pictures (VDR-D200 only) To complete editing Press the MENU button. ≥ Do not turn off this unit while deleting. ≥ When you delete files, use a battery with sufficient battery power or use the AC adaptor. ≥ Do not remove the SD card while deleting. ≥ If files conforming to DCF
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 81
    Editing still pictures (VDR-D200 only) Locking still pictures This is for preventing still picture files from being deleted by mistake. (SD) Still picture files recorded on an SD
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 82
    Editing still pictures (VDR-D200 only) DPOF setting This is for writing the printing data on enables picture printing information to be written onto an SD card so that it can be used on a system supporting DPOF. ≥ The DPOF setting can be established for up to 999 files. ≥ DPOF setting made on other
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 83
    unit off. ≥ When you format the disc, use a battery with sufficient battery power or the AC adaptor. ≥ In the case of a double sided disc, format software. (VDR-D200 only) For more details, refer to the operating instructions of the software. If you connect this unit to a computer to format a DVD
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 84
    Formatting discs and cards Formatting an SD card (VDR-D200 only) This is for initializing cards. ( formatting, do not turn this unit off. ≥ When you format the SD card, use a battery with sufficient battery power or the AC adaptor. ≥ Use this unit to format SD cards. If an SD card is formatted on
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 85
    the same way as DVD-RW (VR format) before finalization. ¬ Connect this unit to the AC adaptor. (Finalization cannot be executed using a battery.) ¬ Rotate the the disc may become unplayable on other devices. ≥ If the power supply stops while finalizing, the finalization will fail and the disc may
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 86
    un-finalizing is complete, press the MENU button to exit the message screen. ≥ When you un-finalize the disc, use a battery with sufficient battery power or the AC adaptor. ≥ DVD-RW (VR format) cannot be un-finalized. DVDRW (VR format) after finalization can be recorded and edited in the same way
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 87
    Protecting a disc Protecting a disc (RAM) (-RW‹VR›) This is for preventing recorded contents from being deleted or edited by mistake. Further recording and editing is not possible on protected discs until the protection is released. ¬ Rotate the mode dial to select . 1 Press the MENU button, then
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 88
    Disc and card management Displaying disc information Displaying disc information (RAM) (-RW‹VR›) (-RW‹V›) (-R) Information such as the number of recorded scenes, the remaining space and whether or not the disc is finalized or protected is displayed. ¬ Rotate the mode dial to select . Press the MENU
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 89
    can be played back on a TV. ≥ Use the AC adaptor to free you from worrying about the battery running down. 1 Connect this unit and a TV. A AV/S cable (supplied) ≥ Insert the plugs as far as they will information, please read the operating instructions for the TV.) With other products 89 LSQT0969
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 90
    /player, then play it back. (RAM) (-RW‹VR›) ≥ Playback is only possible on devices that support 8 cm (3z) DVD-RAM or DVD-RW (VR format). See the operating instructions for DVD recorder/player. ≥ DVD-RW (VR format) may have to be finalized. In this case, finalize the disc on this unit. (l 85
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 91
    DVD recorder is not compatible with, connect this unit and the DVD recorder with the AV/S cable and then record (dub) the disc. (l 92) 1 [Only when you record (dub) a DVD-RW (Video format) or DVD disk, refer to the operating instructions of the DVD recorder. ≥ DVD-RW (VR format) may have to
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 92
    71) ≥ Use the AC adaptor to free you from worrying about the battery running down. 1 Connect this unit and a video device. A AV/S cable (supplied) ≥ Insert the Then start recording on the connected device. ≥ See the operating instructions of the video device for details. To stop recording (dubbing)
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 93
    instructions for the printer.) (SD) ≥ Use the AC adaptor to free you from worrying about the battery running down. ¬ Insert an SD card with recorded images in the unit, turn on the unit and then rotate the mode dial to select . 1 Press the MENU button, then select [ SETUP] # [ USB FUNCTION
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 94
    With a printer (PictBridge) (VDR-D200 only) 5 Press the MENU button to display the PictBridge printing. These operations disable proper printing. - Disconnecting the USB cable - Removing the SD card - Switching the mode dial - Turning off the power ≥ Check the settings for the paper size, quality
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 95
    used Commercially available DVD-Video playback software ∫ When using an SD card recorded on this unit Can do Playing back on a computer Copying files to a computer Software used Standard Windows picture viewer or a commercially available picture viewer Windows Explorer ≥ We will not guarantee
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 96
    Before using with a computer (Windows) Contents on provided CD-ROM The following software applications are contained on the provided CD-ROM. ∫ DVD-RAM Driver This is necessary to configure the unit as a drive on a computer. ∫ DVD-MovieAlbum DVD-MovieAlbumSE: This software is for playing back and
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 97
    using with a computer (Windows) ∫ DVDfunSTUDIO This software is for creating a DVD-Video disc. Use this software when burning a DVD-Video disc from motion pictures edited using DVD-MovieAlbumSE. For details, refer to page 110. 1 DVD-RAM/ DVD-RW(VR) 2 DVD-RW/ DVD-R A 3 DVD-Video B C 1 Export the
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 98
    when connecting to the computer. (Operation is not guaranteed with any other USB cables.) ≥ Operation on Microsoft Windows XP Media Center Edition, Tablet PC Edition and 64-bit operating system is not guaranteed. ∫ DVD-RAM Driver Personal computer IBM PC/AT compatible personal computer Microsoft
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 99
    . ≥ Depending upon the environment of your computer, if it does not support USB 2.0 (Hi-Speed), for example, frame dropout may occur, the audio may be intermittent, or the software may run slowly when you play back recorded images. DVD-RAM and DVD-RW (VR format) can be used if you insert them in the
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 100
    . Article 1 License Licensee is granted the right to use the software, including the information recorded or described on the CD-ROM, instruction manuals, and any other media provided to Licensee (collectively "Software"), but all applicable rights to patents, copyrights, trademarks and trade
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 101
    (Windows) When installing the software, log on to your computer as the Administrator or with a user name with equivalent authorization. (If you do not have authorization to do this, consult your manager.) Do not connect the USB cable before installing the DVD-RAM Driver. If the DVD-RAM Driver is
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 102
    website (VDR-D100 only) If your computer is able to connect to the Internet, you can download the DVD-RAM Driver from the website below. U.S.A.: http://www.panasonic.com/consumerdownloads Canada: http://www.panasonic.ca/english/customercare/downloads.asp 1) Download the DVD-RAM Driver software and
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 103
    Installing DVD-MovieAlbumSE Installation (Windows) 1 Insert the CD-ROM into the computer. The [Setup Menu] screen will appear. ≥ If the [Setup Menu] screen does not appear, double-click the CD-ROM drive icon in [My Computer]. 2 Click [DVD-MovieAlbum]. ≥ The software application may not run
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 104
    Installation (Windows) Installing DVDfunSTUDIO 1 Insert the CD-ROM into the computer. The [Setup Menu] screen will appear. ≥ If the [Setup Menu] screen does not appear, double-click the CD-ROM drive icon in [My Computer]. 2 Click [DVDfunSTUDIO]. ≥ The software application may not run properly if you
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 105
    (VDR-D200 only) Installation (Windows) Reading the operating instructions of the software applications For details on how to use the software applications, read the PDF instructions. ≥ You will need Adobe Acrobat Reader 5.0 or later to read the PDF operating instructions. (l 97) ∫ DVD-RAM Driver
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 106
    ) Connection and recognition (Windows) Connection and recognition procedures After the driver and software applications are installed, the unit must be connected to the computer and be correctly recognized by the computer. ≥ Connect after installing the driver and software applications. ≥ If the
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 107
    Connection and recognition (Windows) ≥ When the unit is connected to a computer, the operation mode cannot be changed and its power cannot be turned off. In this case, disconnect the USB cable (l 108). ≥ When the unit is connected to a computer in disc playback mode, no image will appear on the LCD
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 108
    Windows picture software that supports JPEG DVD-RAM LMXK1931 USB Device] or [MATSHITA DVD Cam USB Device] is selected and click [OK]. Click [Close], and you can safely disconnect the cable. ≥ If you disconnect the USB cable while the access lamp is on, it may damage the data. With a computer (VDR
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 109
    click [Device Manager]. 3 Verify the following items are displayed. ∫ If the driver has been recognized properly When using a disc: Windows XP: ≥ [MATSHITA DVD-RAM LMXK1931 USB Device] is displayed at [DVD/CDROM drives]. ≥ [USB Mass Storage Device] is displayed at [Universal Serial Bus controllers
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 110
    software is first started so read carefully through its terms and conditions, then click [I agree.]. ¬ Connect this unit to the AC adaptor. 1 Insert a DVD-RAM or DVD-RW (VR format) with recorded images in the unit, then rotate the mode dial to select . 2 Connect this unit and a computer. A USB cable
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 111
    -Video disc on a computer (Windows) 3 (On the computer) Select [start] # [All Programs (Programs)] # [Panasonic] # [DVD-MovieAlbumSE] # [DVD-MovieAlbumSE]. DVD-MovieAlbumSE starts and the images recorded on the disc are displayed. When starting DVD-MovieAlbumSE, the [Mount Information] dialog box
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 112
    a computer. Use Windows Explorer to right-click the drive icon for this unit and select [Eject]. Or use the software's eject button to eject the disc. ≥ Title names set using DVD-MovieAlbumSE cannot be approx. 30 minutes at about 30 °C (86 °F)]. With a computer (VDR-D200 only) 112 LSQT0969
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 113
    DVD-Video disc Software used DVD-RAM or DVD-RW (VR format): Playback is not possible DVD-RW (Video format) or DVD-R: Standard OS or commercially available DVD-Video playback software on a computer Copying files to a computer Software used Standard OS picture viewer or a commercially available picture viewer
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 114
    pictures saved on the computer with this software become the contents of the DVD-Video or Video CD disc created with ImageMixer VCD/DVD2. A D B C E F A Preview window B Program List/Playlist/Title List window C Drive select button D Video List window The contents of the program etc. selected
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 115
    VCD/DVD2 This software is for creating DVD-Video and Video CD discs. Use this software when burning a DVD-Video or Video CD disc from motion pictures saved using Pixe VRF Browser EX. For details, refer to page 120. ≥ To create a DVD-Video disc, a separate DVD-RW/DVD-R/+RW/+R drive is required
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 116
    environment ≥ A CD-ROM drive is necessary to install the supplied software. ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some computers cannot be used. ≥ Use the supplied USB cable when connecting to the computer. (Operation is not guaranteed with any
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 117
    equipment operates with the driver installed as standard in OS. For technical inquiries about these software applications, contact the PIXELA Customer Support Center in your region. U.S. and Canada (Toll-Free) +1-800-458-4029 Website: http://www.pixela.co.jp/oem/panasonic/e/index.html (This website
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 118
    . ≥ Do not perform any other operations on your computer while the software is being installed. 1 Insert the CD-ROM into the computer. [PANASONIC] CD-ROM icon appears. 2 Double-click [PANASONIC] # [Imx for Panasonic] # [ImageMixer.pkg]. The installer setup screen appears. 3 Click [Continue]. 4 Read
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 119
    With a computer (VDR-D200 only) Installation (Macintosh) Reading the operating instructions of the software applications For details on how to use the software applications, read the help. ∫ Pixe VRF Browser EX After starting Pixe VRF Browser EX, select [Help] # [Pixe VRF Browser EX Help] from the
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 120
    the folder in which the software is installed and then read through the additional instructions or updated information. ¬ Connect this unit to the AC adaptor. 1 Remove the disc from the unit and rotate the mode dial to select . 2 Connect this unit and a computer. A USB cable (supplied) ≥ Insert the
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 121
    cover on this unit opens. You can remove the disc and disconnect the USB cable. 8 Prepare a DVD-RW/DVD-R/rRW/rR drive that can be written to. ≥ Check that a ] icon in the [ImageMixer for Panasonic] folder you installed. ImageMixer VCD/DVD2 starts. 10 Click the [DVD-Video] button. 11 Use [Select
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 122
    , you cannot use this unit's DISC EJECT lever to remove a disc. Use the software's eject button to eject the disc. ≥ When a computer is accessing a disc in this unit, the ACCESS/PC lamp lights. Do not disconnect the USB cable or AC adaptor while the disc is being accessed as it may damage the data
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 123
    case, disconnect the USB cable (l 124). ≥ When a computer is accessing a card in this unit, the card access lamp lights. ( appears on the LCD monitor.) Do not disconnect the USB cable or AC adaptor while the card is being accessed as it may damage the data. With a computer (VDR-D200 only) 123
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 124
    stored in the [100CDPFP] folder. These can be opened with picture software that supports JPEG pictures. ≥ Up to 999 files can be recorded in the To disconnect USB cable safely Drag the [NO_NAME] icon into the Trash and then disconnect the USB cable. ≥ If you disconnect the USB cable while the
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 125
    Menu list Motion picture recording menus Menus Still picture recording menus (VDR-D200 only) ≥ For [ SETUP] items, refer to ] (l 46) ∫ [ SETUP] [ DISPLAY] (l 127) [ DATE/TIME] (l 38) [ DATE FORMAT] (l 38) [ POWER SAVE] (l 127) [ BEEP SOUND] (l 127) [ LCD SET] (l 39) [ EVF EVF SET] (l 39) [ INITIAL
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 126
    Menus Motion picture playback menus Still picture playback menus (VDR-D200 only) ∫ [ DELETE] (Only when [PLAY MODE DATE FORMAT] (l 38) [ FORMAT CARD] (l 84) [ POWER SAVE] (l 127) [ BEEP SOUND] (l 127) [ LCD SET] (l 39) [ EVF EVF SET] (l 39) [ USB FUNCTION] (l 93, 106) ∫ [ LANGUAGE] (l 35) Others
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 127
    on the power When this unit is recognized by battery from running down. When you use this unit, turn it on again. ≥ In the following cases, the unit may not turn off even when you set this to [5 MINUTES]. - When using the AC adaptor - When connecting the unit to a computer or printer via the USB cable
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 128
    3dB 3:30 PM 12.15.2006 2 Still picture recording (VDR-D200 only) 2 R 100 ; 30× AWB 1/60 OPEN Remaining battery power Remaining time for recording Elapsed recording time Date/Time Manual adjustment mode Disc type DVD-RAM DVD-RW (VR format) DVD-RW (Video format) DVD-RW (unformatted) DVD
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 129
    2 Still picture playback (VDR-D200 only) Indications 1 Playback ; Pause 56 Cue/Review playback 78 Last/first scene displayed at under 640 pixels.) ∫ Confirmatory indications 0 or -- ° The built-in battery is low. (l 38) The warning/alarm indication appears when LCD monitor is rotated
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 130
    (a disc recorded in PAL video format etc.). RECOMMENDED TO USE PANASONIC DISC You inserted a disc that does not meet the DVD standard for quality and performance so you may not be able to record normally. Refer to the following support site for information about discs that have been confirmed as
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 131
    USB. The USB cable is connected in the recording mode. You are attempting to turn the mode dial with the USB cable connected to the unit. DISCONNECT USB CABLE. The unit's power When you repair the disc, use a battery with sufficient battery power or the AC adaptor. ≥ Depending on the condition of
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 132
    is used. Functions Scene mode Change of white balance Adjusting the shutter speed, iris/gain Conditions which disable the functions ≥ When setting the AUTO/MANUAL/ FOCUS switch to AUTO ≥ When the MagicPix function is used ≥ When the video light is on ≥ When digital zoom (30k or higher) is used
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 133
    ) can be played back on a DVD recorder, DVD player etc. that supports DVD-RAM or DVD-RW (VR format). Refer to the operating instructions of the DVD recorder or DVD player. ≥ DVD-RW (VR format) may have to be finalized. In this case, finalize the disc on this unit. Can software other than that For
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 134
    DVD-RAM, DVD-RW (VR format): Use DVD-MovieAlbum CopyTool or the File Export function in DVD-MovieAlbumSE. DVD-RW (Video format), DVD-R: Copying data to a computer is not possible. SD card: Copy with Windows commercially available DVD-Video playback software. SD card: Use picture viewer software. Use
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 135
    Troubleshooting Troubleshooting Unit operations Problem This unit cannot be turned on. This unit is turned off automatically. This unit does not stay on long enough. Battery runs down quickly. This unit cannot be operated though powered unit is powered. # Connect a charged battery or AC adaptor. ≥
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 136
    Troubleshooting Problem A function indication such as mode indication, remaining time indication, or elapsed time indication is not shown. Recording does not start although power ≥ Is the DVD-RAM or the DVD-RW (VR format) writeprotected? # Release the protection. (l 87) If the DVD-RAM or DVD-RW (VR
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 137
    Troubleshooting Problem Sound is not played back from the built-in speaker input on the TV? # Please read the operating instructions of your TV and select the channel that matches the input used for the connection. ≥ Is the DVD-RAM or the DVD-RW (VR format) writeprotected? # Release the protection.
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 138
    . If so, this unit needs repair. Detach the power connected, and consult the dealer who you purchased this unit from. Do not attempt to repair the appliance by yourself. With a computer (Windows) Problem Check points Even if connected by the USB cable, this unit is not recognized by the computer
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 139
    will automatically recognize the unit again. ≥ To disconnect the USB cable safely, double-click the icon in the task tray and follow the instructions on the screen. With a computer (Macintosh) Problem Check points Even if connected by the USB cable, this unit is not recognized by the computer
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 140
    Troubleshooting Problem Check points DVD-RAM or DVD-RW (VR format) icon is not displayed on the desktop. ≥ What version of Mac OS X the unit is connected to the computer. Use the software's eject button to eject the disc. When the USB cable is disconnected, an error message will appear on the
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 141
    cables. If you use optional accessories, use the cords and the cables supplied with them. Do not extend the cords and the cables Before cleaning, detach the battery or pull out the AC cable from the AC outlet. ≥ The use a chemical dust cloth, follow the instructions that came with the cloth. Do not
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 142
    protection function may be triggered, making it impossible to use the unit. Be sure to detach the battery after use. ≥ If the battery is left attached, a minute amount of current continues to flow even if the unit's power is off. Keeping the unit in this state may result in over discharge of the
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 143
    the power, or cause any vibrations or impacts. DVD-R ≥ For optimum recording on DVD-R disc DVD recorder. The recorded data may be damaged. When the lamp is off: ≥ Charging is completed. ≥ When the lamp is off but charging is not completed, trouble may have occurred in the AC adaptor or the battery
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 144
    (during access to the SD card), do not remove the SD card, turn off the power, or cause any vibrations or impacts. LCD monitor/viewfinder ≥ When the LCD monitor gets to do with the lens is fogged up. Remove the battery or AC adaptor and leave the unit for about 1 hour. When the unit becomes
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 145
    may not function properly if there is more than one light source. For light outside the functional automatic white balance adjustment range, use the manual white balance adjustment mode. White balance The images recorded by the unit may become bluish or reddish under the influence of certain light
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 146
    does not work correctly in the following situations. Record pictures in the manual focus mode. Recording distant and close-up objects at the same time behind dirty or dusty window The subject behind the window will not be focused because the focus is on the dirty window. Similarly, when recording
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 147
    Audio output level (Line) USB EIA Standard: 525 lines, 60 fields NTSC color signal DVD Video Recording format (DVD-RAM, DVD-RW) DVD-Video format (DVD-RW, DVD-R) 1/6-inch CCD image sensor Total pixels approx. 680 K Effective pixels Motion picture: approx. 340 K 30k power zoom F1.8-F3.9 (f = 1.90
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 148
    based on Exif 2.2 standard), DPOF corresponding Picture size 640k480 AC adaptor: Information for your safety Power source: AC 110 V to 240 V, 50/60 Hz Power consumption: 19 W DC output: DC 7.9 V, 1.4 A (Unit operation) DC 8.4 V, 0.65 A (Battery charging) Dimensions Mass 61 mm (W) k 32 mm
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 149
    card (VDR-D200 instructions. Risk of fire, explosion and burns. Do not recharge, disassemble, heat above 100 °C (212 °F) or incinerate. Keep the Button-Type battery out of the reach of children. Never put Button-Type battery in mouth. If swallowed, call your doctor. Install battery with Panasonic
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 150
    accessories Accessory No. LM-AF30U LM-AF60U LM-RW30U LM-RW60U LM-RF30V Figure Description 8 cm (3z) DVD-RAM (single sided) 8 cm (3z) DVD-RAM (double sided) 8 cm (3z) DVD-RW (single sided) 8 cm (3z) DVD-RW (double sided) 8 cm (3z) DVD-R (single sided) PV-DAC14 AC adaptor with AC Cable and DC
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 151
    order. 1. Model # 2. Items Ordered Accessory # Description Price Each Quantity Total Price Subtotal Your State PANASONIC DEALER OR CALL PANASONIC'S ACCESSORY ORDER LINE AT 1-800-332-5368 [6 AM-5 PM M-F, 6 AM-10:30 AM SAT, PACIFIC TIME] OR MAIL THIS ORDER TO: PANASONIC SERVICES COMPANY ACCESSORY
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 152
    is wrong with the unit and any symptom it is exhibiting. Mail this completed form and your Proof of Purchase along with your unit to: Panasonic Services Company 410B Airport Road Elgin, IL 60123-9333 Attn: Camcorder Repair 152 LSQT0969 Others
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 153
    Panasonic Consumer Electronics Company or Panasonic Camcorder Parts Labor One (1) Year (except CCD Image Sensor) Ninety (90) Days CCD Image Sensor - 6 (Six) Months Ninety (90) Days Service Carry-In or Mail-In Contact Number 1-800-211-PANA(7262) DVD -9788 Rechargeable Batteries (in exchange
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 154
    833-8855 Accessory Purchases Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at: http://www.pasc.panasonic.com or, MAIL TO: Panasonic Services Company 410B Airport Road Elgin, IL 60123-9333 Attention: Camcorder Repair Please carefully
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 155
    does it cover any product which is used commercially. Dry cell batteries are also excluded from coverage under this warranty. This warranty is Servicentre at www.panasonic.ca : Link: "ServicentresTM locator" under "Customer support" Panasonic Factory Service: Vancouver Panasonic Canada Inc. 12111
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 156
    -RAM, DVD-RW, DVD-R 19 ∫F Fade 48 Finalize 85 Format Card 84 Disc 83 Frame-by-frame playback 62 ∫G Gain 60 Others ∫I Image stabilizer function 53 Initial setting 127 Iris 60 ∫L Language 35 LCD monitor 18, 39, 144 Locking files 81 156 LSQT0969 ∫M MagicPix function 53 Manual focus
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 157
    para el uso rápido Spanish Quick Use Guide/Guía española para el uso rápido ∫ Carga de la batería 1 Conecte el cable eléctrico de CA al adaptador de la deje. ∫ Cómo quitar la batería Mientras hace deslizar la palanca BATTERY RELEASE, haga deslizar la batería para quitarla. 2 Abra la tapa del
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 158
    Use Guide/Guía española para el uso rápido ∫ Cómo insertar/quitar una tarjeta 2 Pulse de nuevo el botón de inicio/ SD (sólo VDR-D200) Gire el selector de modo para seleccionar . ∫ Grabación de imágenes fijas (sólo VDR-D200) ≥ Gire el selector de modo para seleccionar . Pulse el botón PHOTO SHOT.
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 159
    Spanish Quick Use Guide/Guía española para el uso rápido ∫ Reproducción de imágenes dinámicas ≥ Gire el selector de modo para seleccionar . ∫ Reproducción de imágenes fijas (sólo VDR-D200) ≥ Gire el selector de modo para seleccionar . 1 Seleccione la escena a ser reproducida. 1 Seleccione el
  • Panasonic VDRD200 | Dvd Camcorder-english/spanish - Page 160
    Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Panasonic Puerto Rico, Inc. Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160

P
PC
Others
With a computer (VDR-D200 only)
With other products
Disc and card management
Editing
Playback
Recording
Setup
Before using
LSQT0969 E
For USA assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca
Operating Instructions
DVD Video Camera
Model No.
VDR-D200
VDR-D100
Cover
–: Not available
Before connecting, operating or adjusting this
product, please read the instructions completely.
Spanish Quick Use Guide is included.
Guía para rápida consulta en español está incluida.
VDR-D200
VDR-D100
Card slot
µ
Computer
software
µ