Panasonic WJRT416 WJRT416 User Guide - Page 2

CONTENTS Limitation of Liability 3 Disclaimer of Warranty 3 Preface 4 About These Operating Instructions 4 System Requirements for a PC 5 Trademarks and Registered Trademarks 5 Abbreviations 5 Installation 6 Uninstallation of the monitoring software 6 Start the RT4Client 7 Operation window 7 Image display area 7 Area selection buttons 7 Multi-screen selection buttons 7 Status display area 7 Error/alarm display area 8 Recorder control buttons 8 System control buttons 8 Time and date display area 9 Recorder information display area 9 Configure the Network Settings 11 Configure the network settings of the recorder .... 11 Configure the network settings of a PC 11 Settings relating to the connection with the recorder 14 Monitor Live Images 15 Switch the image display area between a single screen and a multi-screen 16 Check the status of the camera 16 Temporarily change color of text displayed in the image display area 17 Control the cameras 17 Disconnect the connection with camera 17 Login to the recorder 18 Play recorded images on the recorder 19 Play recorded images from the search result window displayed after searching with the designated search filters (List Search Playback 19 Play recorded images from the search result window displayed after searching by designating the start time of recording (Time & Date Search Playback 21 Stop playback 23 Control panel 24 Display the control panel 24 Close the control panel 24 Save the image currently being displayed on the PC 24 Capture the images currently being displayed ..... 25 Muting audio 25 Display images from the camera on a full screen 25 Control the cameras 26 Operations during playback 28 2 Other available operations when displaying live images 29 Frame display 29 Sequential display 31 Favorite Display 32 Map display 33 Recorder operation 34 Configuration of the settings of the recorder System Setup (Setup - System Setup 34 Recording/Event Setup (Setup - Recording/ Event Setup 35 Communication Setup (Setup - Communication Setup 35 Check of each log of the recorder (Log 37 Check of the system information and disk information of the recorder (Information 37 Start/stop of the manual recording using this software (Manual Rec. Control 38 Determination whether to enable or disable the alarm output from the AUDIO IN/ALARM OUT terminal on the rear of the recorder (Alarm Output Control 38 Reboot of the recorder (Maintenance - Reboot) .. 39 Download/upload of the setup data from/ to the recorder Setup Data Download/Upload (Maintenance - Setup Data Download/Upload) ... 39 Download/upload of the language data from/ to the recorder Language Data Download/Upload (Maintenance - Language Data Download/ Upload 40 Firmware update of the recorder Firmware Update (Maintenance - Firmware Update 41 Download recorded images from the recorder ..... 42 Remote Talk 43 Configure the settings of the monitoring software (Monitor System Config 44 Recorder Setup (Monitor System Config - Recorder Setup 44 My Favorite Display Setup (Monitor System Config - My Favorite Display Setup 46 Sequential Display Setup (Monitor System Config - Sequential Display Setup 47 Map Setup (Monitoring System Config - Map Setup 48 Advanced Setup (Monitoring System Config - Advanced Setup 50 Monitor System Version 51 Language 51 Playback downloaded recorded images using the RT4Viewer 52 Start the RT4Viewer 52 Playback downloaded recorded images 54 Search and play 55 Alteration check 56 Troubleshooting 57