Panasonic WV-CF294T Color Cctv Camera-english/french - Page 15

Panning table Indication TOP LOCK Panning table lock screw BLC ALC ELC B.S D/N ON OFF CCW: -140° Indication i : CCD up-side CW: +180° w Rotate the tilting table to adjust the tilting position of the camera. (Range: ±75 °) • Since using a variable focal lens, it is possible to change the angular field of view. This lens can also be rotated in the reverse direction, but the image azimuth is reversed. In such a case, turn the panning table to the 180 ° side. Then, the image azimuth is corrected. • When used at an angle that is close to horizontal, it must be noted that the shadow of the dome cover may be projected. Azimuth adjuster Indication TOP LOCK BLC ALC ELC B.S. D/N ON OFF Rotating angle: -100° Rotating angle: +100° 3. Zoom and focus adjustment At the same time for the pan and tilt adjustments (Step 2), make zoom and focus adjustments. w Focus lock lever (WV-CF284/CF284T) Focus lever (WV-CF294/CF294T) NEAR WIDE FAR TELE q Zoom lock lever Variable tilt angle: ±75° e Rotate the azimuth adjuster to adjust the azimuth angle of the image. (Range: ±100 °) q Loosen the zoom lock lever and move the lever between TELE and WIDE to obtain the appropriate angle of view. Tighten the zoom lock lever. w Loosen the focus lock lever and move the lever between FAR and NEAR to obtain the optimum focus. Tighten the focus lock lever. Note: To change the angle of view by moving the zoom lock lever, also move the focus lock lever to adjust the focus. 15