Panasonic WV-CF294T Color Cctv Camera-english/french - Page 16

q Loosen the zoom lock lever and move the lever between TELE and WIDE to obtain the appropriate angle of view. Tighten the zoom lock lever. w Move the focus lever between FAR and NEAR to make coarse adjustment of the focus. Note: To change the angle of view by moving the zoom lock lever, also move the focus lever to adjust the focus. e Press the AF switch on the side of the camera. The LED for AF lights up for approx. 10 sec. and the focus is automatically adjusted. Notes: • The ABF function does not cover the full focus range. Be sure to perform coarse adjustments for the angle of view and focus manually, and then press the AF switch to activate the ABF function. • Do not touch the lens while the LED for AF stays lighted. Failure to observe this may cause trouble. • The AF switch may not adjust the focus initially. In such a case, widen the aperture by pointing the camera at a dark subject. • The AF switch may not adjust the focus resulting in LED for AF blinking. For the following subjects, select ELC with the light control mode selector and adjust the focus manually. • Quickly moving subjects • Subjects with remarkable illuminance change • Subjects with low illuminance (e.g. headlights) • Subjects with extremely bright or reflective character • Subjects behind a window • Subjects with less contrast between light and dark (e.g. white walls) • Subjects with extensive greater depth • Subjects with flickering • Subjects with laterally parallel lines (e.g. shutters) • Foggy or dirty dome cover r Focus adjustment is available by pressing the AF switch with a pointed item such as a ballpoint pen even after mounting the dome cover. In such a case, the direction of the camera and the presence of the object should be checked beforehand because visual check is not available on the monitor. Notes: • Before mounting the top cover, make sure that the subject is present. • Before pressing the AF switch, make sure that the marker is adjusted to the "LOCK" position. • Be aware that zoom adjustment and coarse focus adjustment shall be performed beforehand to obtain precise focus. • Auto focus adjustment is available only when the AF switch is pressed regarding WV-CF294 and WV-CF294T. Press the AF switch with a pointed item such as a ballpoint pen. "LOCK" position 16