Panasonic WV-CP500 Installation Guide
Panasonic WV-CP500 Manual
 |
View all Panasonic WV-CP500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Panasonic WV-CP500 manual content summary:
- Panasonic WV-CP500 | Installation Guide - Page 1
Installation Guide Color CCTV Camera WV-CP500 Model Nos. WV-CP504 This illustration represents WV-CP500. Lens: Option Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. No model number suffix is shown in this manual. - Panasonic WV-CP500 | Installation Guide - Page 2
servicing) instructions in the literature accompanying the appliance. Power disconnection. Unit with or without ON-OFF switches have power supplied to the unit whenever the power cord is inserted into the power and, if not installed and used in accordance with the instruction manual, may cause - Panasonic WV-CP500 | Installation Guide - Page 3
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or - Panasonic WV-CP500 | Installation Guide - Page 4
CORRESPONDING PRODUCT (S). Disclaimer of warranty IN NO EVENT SHALL Panasonic Corporation BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT DUE TO ANY REASON OR CAUSE INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT; (5) ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISING OUT - Panasonic WV-CP500 | Installation Guide - Page 5
to a video monitor allows users to use this product as a monitoring camera. • WV-CP500: 120 V AC power supply • WV-CP504: 24 V AC, 12 V DC power supply Introduction of SUPER-D5 (super dynamic function) Integration of SUPER-D5 into the CCD and signal processing circuit has achieved approximately 128 - Panasonic WV-CP500 | Installation Guide - Page 6
About the user manuals The operating instructions of the camera consist of 2 sets: this book and operating instructions (PDF). This book explains how to install the camera. Refer to the "Operating Instructions (PDF)" on the provided CD-ROM for descriptions of how to perform the unit settings. Adobe® - Panasonic WV-CP500 | Installation Guide - Page 7
functions 9 Precautions for installation...12 Installation and connection...14 Optional dedicated lens...14 External synchronization switch 18 Setup menu...22 List of setup menu...22 Basic operation...24 Screen transition diagram...26 Troubleshooting...27 Specifications...29 Standard accessories - Panasonic WV-CP500 | Installation Guide - Page 8
from an external 12 V DC/ 24 V AC (WV-CP504) or 120 V AC (WVCP500) power-supply device. Refer to service personnel for how to turn on/off the power. Use this product for indoor use only. Do not expose this product to direct sunlight for hours and do not install the product near a heater or an air - Panasonic WV-CP500 | Installation Guide - Page 9
(LEFT) (SET) (RIGHT) (DOWN) Operation buttons* * The following names are assigned to each button in this book: : Up button (UP) : Down button (DOWN) : Left button (LEFT), NEAR : Right button (RIGHT), FAR : Setting button (SET), BF/MENU Side view (WV-CP504) ALC lens connector Tripod mount base 9 - Panasonic WV-CP500 | Installation Guide - Page 10
indicator Video output connector 120V ~ 60Hz Power connector Rear view (WV-CP504) External terminal ALARM OUT GND VIDEO OUT POWER ALARM IN Power indicator NEAR 24V ~ IN 1-L 2-N GND (LEFT) (UP) BF/MENU FAR (SET) (RIGHT) (DOWN) 12V IN NC Operation buttons* * The following names are assigned - Panasonic WV-CP500 | Installation Guide - Page 11
can be mounted on either top or bottom of the camera head. (Tripod socket hole: 1/4-20 UNC for tripod) AC/DC power terminal (only for WV-CP504) The power supply of 24 V AC or 12 V DC is connected to this terminal. Operation buttons This buttons are used to perform various settings in the setup - Panasonic WV-CP500 | Installation Guide - Page 12
below 90 %.The input power source is 12 V DC/24 V AC (WV-CP504) or 120 V AC (WV-CP500). Installing place Contact your dealer for assistance if you are unsure of an appropriate place in your particular environment. • Make sure that the installation area is strong enough to hold the camera, such as - Panasonic WV-CP500 | Installation Guide - Page 13
Power cord (only for WV-CP500) Connect the power cord securely. Run the power cord so that no load is applied to the cord when panning or tilting the camera. (Failure to observe this may disconnect the power cord, and accordingly no image is displayed.) 13 - Panasonic WV-CP500 | Installation Guide - Page 14
Installation and connection Cautions: • ONLY CONNECT WV-CP504 TO 24 V AC OR 12 V DC CLASS 2 POWER SUPPLY. • Be sure to connect the grounding lead to the GND terminal. z Rotate the lens (option) clockwise slowly to mount the lens. Important: • For use of C- - Panasonic WV-CP500 | Installation Guide - Page 15
13 24 Pin No. 1 2 3 4 Brake @ Brake ! Drive ! Drive @ c Secure the camera mount bracket (option) to an installation position, and mount the camera on the camera mount bracket. Important: • If the total weight of the camera and lens exceeds 1 kg {2.2 lbs.}, use a housing to take measures against - Panasonic WV-CP500 | Installation Guide - Page 16
• The mounting conditions of the camera mount bracket are described as follows: Installation place On ceiling On wall Applicable mount bracket WV-7011 WV-7010 WV-7012 WV-831 WV-7013 Recommended Number of screw screw M6 4 pcs. M8 3 pcs. M6 3 pcs. M8 4 pcs. M6 3 pcs. Minimum pull- - Panasonic WV-CP500 | Installation Guide - Page 17
POWER GND ALARM IN VIDEO OUT Coaxial cables To video input 120V ~ 60Hz WV-CP500 b Use a cable tie (locally procured) to attach the coaxial cable to the camera Camera mount bracket (option) The cable shall be tied to the camera - Panasonic WV-CP500 | Installation Guide - Page 18
on the SETUP menu. Refer to the network operating instructions (PDF) for further information. Important: • Be sure to turn off the power of each device before connection. Alarm output Input specification: Open collector out- ALARM OUT POWER GND ALARM IN WV-CP500 put (max. voltage: 16 V DC) Off - Panasonic WV-CP500 | Installation Guide - Page 19
connected to this power connector. Connect between the power connector on the rear side of the camera and a plug socket with the supplied power cord. 120 V AC 60 Hz Power cord (accessory) ALARM OUT POWER GND ALARM IN VIDEO OUT 120V ~ 60Hz WV-CP504 Important: • The power supply of 24 V AC - Panasonic WV-CP500 | Installation Guide - Page 20
end. How to adjust the back focus Use the operation buttons (+ pages 12 and 13) for this adjustment. The back focus is also adjustable in the setup menu. Refer to the operating instructions (PDF) for further information. q Press the setting button after adjusting the view angle while viewing - Panasonic WV-CP500 | Installation Guide - Page 21
→ B/W" of "BACK-FOCUS SETUP" to "AUTO" or "PRESET" in the setup menu (+ the setup instructions (PDF) allows users to adjust the focus in both the near-infrared light and visible light regions (The variation in illuminance is not followed after focus adjustment.). • When a non-Panasonic lens that has - Panasonic WV-CP500 | Installation Guide - Page 22
area. Refer to the operating instructions (PDF) for further information. List of setup menu Setup item CAMERA ID CAMERA SCENE 1/SCENE 2 ALC/ELC SHUTTER AGC SENS UP WHITE BAL DNR BW MODE i-VMD SYSTEM SYNC ALARM IN/OUT PRIVACY ZONE STABILIZER EL-ZOOM BACK-FOCUS Description This item specifies the - Panasonic WV-CP500 | Installation Guide - Page 23
Setup item SPECIAL CHROMA GAIN AP GAIN PEDESTAL HUE PIX OFF COMMUNICATION CAMERA RESET SER.NO. LANGUAGE Description Adjusts the chroma level. Adjusts the aperture level. Adjusts the pedestal (brightness) level. Adjusts the chroma phase (hue). Corrects image - Panasonic WV-CP500 | Installation Guide - Page 24
top screen of the setup menu. Step 1 Press the up button or the down button to move the cursor to "END". MODEL WV-CP500 SERIES CAMERA ID OFF CAMERA SYSTEM BACK-FOCUS SPECIAL LANGUAGE END SETUP DISABLE Step 2 Press the right button to move the cursor to "SETUP", and press the setting - Panasonic WV-CP500 | Installation Guide - Page 25
ATW1 DNR HIGH BW MODE AUTO1 i-VMD RET TOP END Note: • If the top screen of the setup menu is called up with the operation buttons while a camera image is displayed, the setup mode is always "DISABLE" to prevent operation errors. To perform settings in the setup menu, change the setup mode - Panasonic WV-CP500 | Installation Guide - Page 26
**BACK-FOCUS SETUP** ABF PUSH SW MANUAL-ADJ C/L B/W AUTO SETUP-SW LOCK OFF NEAR FAR INDICATOR XXXX RET TOP END "SPECIAL SETUP" screen **SPECIAL SETUP** CHROMA GAIN ...|...128 AP GAIN ...|... 32 PEDESTAL ...|... 32 HUE ...|... 0 - + PIX OFF COMMUNICATION COAX CAMERA RESET - Panasonic WV-CP500 | Installation Guide - Page 27
Troubleshooting Before asking for repairs, check the symptoms with the following table. Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not described below. Symptom Cause/solution Reference pages • Are the power cord - Panasonic WV-CP500 | Installation Guide - Page 28
Cause/solution Reference pages Damaged power cord sheathing Heated portion of power line consisting of power cord, connector, and power plug during use Warmed power cord or loosened connection by bending or stretching during use • The power cord, power connector, or power plug is damaged. Use - Panasonic WV-CP500 | Installation Guide - Page 29
430g {0.95 lbs} (Power cord excluded) WV-CP504: Approx. 350g {0.77 lbs} Finish: Light FL silver • Camera Image sensor: Effective pixels: Scanning area: Scanning system: Scanning frequency: Synchronization: Resolution: Minimum illumination: Signal-to-noise ratio: Dynamic range: ALC lens drive - Panasonic WV-CP500 | Installation Guide - Page 30
Standard accessories CD-ROM 1 pc. Operating Instructions (this book 1 pc. Warranty card 1 pc. *The CD-ROM contains the operating instructions (PDF). The following parts are used during installation procedures. Power connector (only for WV-CP500 1 pc. Power cord plug (only for WV-CP504 1 pc. 30 - Panasonic WV-CP500 | Installation Guide - Page 31
31 - Panasonic WV-CP500 | Installation Guide - Page 32
North America www.panasonic.com/business/ For customer support, call 1.800.528.6747 Three Panasonic Way 2H-2, Secaucus, New Jersey 07094 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 http://www.panasonic.ca Panasonic Sales Company Panasonic Puerto Rico
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
 |
 |
Before attempting to connect or operate this product, please read these
instructions carefully and save this manual for future use.
No model number suffix is shown in this manual.
This illustration represents WV-CP500.
Lens: Option
Installation Guide
Color CCTV Camera
Model Nos.
WV-CP500
WV-CP504