Panasonic WV-CP500 Installation Guide - Page 16

Installation, place, Applicable mount, bracket, Recommended, screw, Number of, Minimum pull-out,

Get Panasonic WV-CP500 PDF manuals and user guides View all Panasonic WV-CP500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

• The mounting conditions of the camera mount bracket are described as follows: Installation place On ceiling On wall Applicable mount bracket WV-7011 WV-7010 WV-7012 WV-831 WV-7013 Recommended Number of screw screw M6 4 pcs. M8 3 pcs. M6 3 pcs. M8 4 pcs. M6 3 pcs. Minimum pull-out strength (per 1 pc.) 196 N {44.06 lbf} 196 N {44.06 lbf} 196 N {44.06 lbf} 921 N {207.05 lbf} 2.25 kN {505.82 lbf} For some applicable mount brackets, "A" is attached to the model number. The mounting conditions are the same even for the A-attached models. • When attaching an optional tripod mount base on the bottom of the camera, use the removed screws to attach the tripod mount base. Use of longer or shorter screws may cause drop or damage. Recommended tightening torque: 0.39 N·m {0.29 lbf·ft} Tripod socket hole: 1/4-20 UNC for tripod Tripod mount base Mounting screws 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
16
• The mounting conditions of the camera mount bracket are described as follows:
For some applicable mount brackets, "A" is attached to the model number. The mounting condi-
tions are the same even for the A-attached models.
Installation
place
On ceiling
On wall
Applicable mount
bracket
WV-7011
WV-7010
Recommended
screw
M6
M8
Number of
screw
4 pcs.
3 pcs.
Minimum pull-out
strength (per 1 pc.)
196 N {44.06 lbf}
196 N {44.06 lbf}
WV-7012
M6
3 pcs.
196 N {44.06 lbf}
WV-831
M8
4 pcs.
921 N {207.05 lbf}
WV-7013
M6
3 pcs.
2.25 kN {505.82 lbf}
Tripod socket
hole: 1/4-20
UNC for tripod
Tripod mount
base
Mounting
screws
• When attaching an optional tripod mount
base on the bottom of the camera, use
the removed screws to attach the tripod
mount base. Use of longer or shorter
screws may cause drop or damage.
Recommended tightening torque:
0.39 N·m {0.29 lbf·ft}