Panasonic WV-CP500 Installation Guide - Page 22

Setup menu Performing each setting item in the setup menu should be completed in advance to use this unit. Perform the settings for each item in accordance with the conditions of the camera shooting area. Refer to the operating instructions (PDF) for further information. List of setup menu Setup item CAMERA ID CAMERA SCENE 1/SCENE 2 ALC/ELC SHUTTER AGC SENS UP WHITE BAL DNR BW MODE i-VMD SYSTEM SYNC ALARM IN/OUT PRIVACY ZONE STABILIZER EL-ZOOM BACK-FOCUS Description This item specifies the camera title. The camera title that indicates the camera location and other information about the camera is created with alphanumeric characters and symbol, and displayed on the screen. Performs the camera operation settings. Selects a scene file. It is possible to register and save the settings as a scene file in case that it is necessary to change the settings such when shooting at night or on holidays. Selects the method of controlling the quantity of light in accordance with the lens to be used. Specifies the electronic shutter speed. Specifies gain adjustment. Specifies electronic sensitivity enhancement. Specifies white balance adjustment. Selects the level of the digital noise reduction function. Performs each setting regarding the black-and-white mode such as switching between color and black-and-white images. Performs settings regarding intelligent VMD (Video Motion Detector) such as motion detection and object abandonment/removal detection. Performs the settings regarding the camera system such as synchronization, alarm input/output, and privacy zone. Specifies the synchronization type. Performs the settings of the ALARM IN connector and the ALARM OUT connector. Hides undesired portions in the camera shooting area. Decides whether or not to enable the image stabilizer. Toggles the electronic zoom on and off. Selects the back focus setting type and performs fine adjustment. 22