Panasonic WV-CP500 Installation Guide - Page 15
Secure the camera mount bracket
![]() |
View all Panasonic WV-CP500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
x Connect the lens cable to the ALC lens connector of the camera. ALC lens connector 13 24 Pin No. 1 2 3 4 Brake @ Brake ! Drive ! Drive @ c Secure the camera mount bracket (option) to an installation position, and mount the camera on the camera mount bracket. Important: • If the total weight of the camera and lens exceeds 1 kg {2.2 lbs.}, use a housing to take measures against camera drop. • Prepare mounting screws according to the material of the area where the camera mount bracket (option) is to be installed. The installation method may be different depending on the material of the area where the bracket is to be installed. • When installing on steel: Fix with bolts and nuts (M6 or M8). • When installing on concrete: Fix with anchor bolts or AY plug bolts (M6 or M8). Recommended tightening torque (M6): 5.0 N·m {3.69 lbf·ft} Recommended tightening torque (M8): 6.2 N·m {4.57 lbf·ft} Camera mount bracket (option) Screws (locally procured) Screws (locally procured) 15
![](/manual_guide/products/panasonic-wvcp504-installation-guide-be21910/15.png)