Panasonic WV-SW155 Installation Guide - Page 10

Precautions Refer installation work to the dealer. Installation work requires technique and experiences. Failure to observe this may cause fire, electric shock, injury, or damage to this product. Be sure to consult the dealer. Stop the operation immediately when something is wrong with this product. When smoke goes up from the product, the smell of smoke comes from the product, or the exterior of the product has deteriorated, continued use will cause a fire or fall of the product resulting in injury, accidents, or damage to the product. Turn the power off immediately and contact qualified service personnel for service. Do not attempt to disassemble or modify this product. Failure to observe this may cause fire or electric shock. Consult the dealer for the repair or inspections. resulting in injury. Avoid installing this product in the locations where salt damage occurs or corrosive gas is produced. Otherwise, the mounting portions will deteriorate and accidents such as a fall of the product may occur. Install this product in a location high enough to avoid people and objects from bumping the product. Failure to observe this may cause a drop resulting in injury or accidents. Do not strike or give a strong shock to this product. Failure to observe this may cause fire or injury. Shock resistance grade (50J IEC60068-2-75 or equivalent) is applied to this product only when it is installed correctly as described in these operating instructions and appropriate shock resistance treatment is applied. Do not insert any foreign objects. This could permanently damage this product. Turn the power off immediately and contact qualified service personnel for service. Select an installation area that can support the total weight. Selecting an inappropriate installation surface may cause this product to fall down or topple over, resulting in injury. Installation work shall be started after sufficient reinforcement. Turn the power off when do wiring of this product. Failure to observe this may cause electric shock. In addition, short circuit or wrong wiring may cause fire. The exclusively designed mount bracket shall be used. Failure to observe this may cause a drop resulting in injury or accidents. Use the exclusively designed mount bracket for installation. Periodic inspections shall be conducted. Rust on the metal parts or screws may cause a fall of the product resulting in injury or accidents. Consult the dealer for the inspections. Do not use this product in an inflammable atmosphere. Failure to observe this may cause an explosion 10 The screws and bolts must be tightened to the specified torque. Failure to observe this may cause a drop resulting in injury or accidents. Do not rub the edges of metal parts with your hand. Failure to observe this may cause injury.