Panasonic WV-SW155 Installation Guide - Page 31

Attaching the dome cover z Attach the dome cover to the camera by using the tamperproof screw bit (accessory) to tighten the 3 dome cover fixing screws (M3). n Ceiling n Wall Screw cover Dome cover fixing screws Dome cover fixing screws x Close the screw cover. c Remove the cover film completely. Important: • When attaching the dome cover the focus may be slightly disturbed. If this occurs, remove the dome cover and make the necessary adjustments. • Before attaching the dome cover, make sure that the subject is present. • Securely tighten all the fixing screws (x3) of dome cover. Otherwise, water exposure may cause damage or malfunction of camera, or camera dropping may result in injury. (Recommended tightening torque: 0.8 N·m {0.59 lbf·ft}) • Remove the cover film from the dome. 31