Panasonic WV-SW155 Installation Guide - Page 11

Do not touch this product or the connected cables during thunder. (even in the process of work) Failure to observe this may cause electric shock. Turn the power off when cleaning this product. Failure to observe this may cause injury. [Precautions for use] This product has no power switch. When turning off the power, turn off a PoE hub or remove a network cable. Product disposal/transfer Data saved on this product or a storage device used with this product may lead to personal information leakage. When it is necessary to dispose or give this product to someone, even when for repair, make sure that there is no data on this product. Cleaning this product body Be sure to turn off the power before cleaning. Failure to observe this may cause injury. Do not use strong abrasive detergent when cleaning this product. Otherwise, it may cause discoloration. To keep on using with stable performance Do not use this product in hot and humid conditions for a long time. Failure to observe this causes component degradation resulting in life shortening of this product. Do not expose the product to direct heat sources such as a heater. Do not touch the dome with your bare hands. A dirty dome causes deterioration of picture quality. Handle this product with care. Do not drop this product, nor apply shock or vibration to the product. Failure to observe this may cause trouble. If a strong shock or vibration is applied to the dome cover, it may cause damage or allow water to enter this product. About the PC monitor Displaying the same image on a monitor for a long time may damage the monitor. It is recommended to use a screen-saver. When an error is detected, this product will restart automatically. This product will be inoperable for around 2 minutes after the restart just as when the power is turned on. Cleaning the lens Use a lens cleaning paper (used to clean camera lenses or lenses of spectacles). When using solvent, use an alcohols solvent and do not use a thinner or a glass cleaner. Transmission interval Image transmission interval may become slow depending on the network environment, PC performance, shooting subject, access number, etc. About SDHC/SD memory card • Before inserting the SDHC/SD memory card, turn off the power of this product first. Otherwise, it may cause malfunction or damage data recorded on the SDHC/ SD memory card. Refer to page 22 for descriptions of how to insert/remove an SDHC/SD memory card. • When using an SDHC/SD memory card, format it using this product. Recorded data on the SDHC/SD memory card will be deleted when formatted. If an unformatted SDHC/SD memory card or an SDHC/SD memory card formatted with other devices is used, this product may not work properly or performance deterioration may be caused. Refer to the Operating Instructions (included in the CD-ROM) for how to format a SDHC/SD memory card. 11