Panasonic WVNP244 WVNP244 User Guide - Page 24
Multicast port], Available port number, Default, Available value, Important, In this case
View all Panasonic WVNP244 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
[Multicast port] Enter the multicast port number (used to transmit MPEG-4 images from the camera). Available port number: 1024 - 50000 (Only even num- bers are available.) Default: 37004 [Multicast TTL] Enter the multicast TTL value. Available value: 1 - 254 Default: 16 Important: • Depending on the PC in use for monitoring, the mul- ticast port number may be already in use. In this case, it may be impossible to monitor images. Change the multicast port number. • When transmitting MPEG-4 image via a network, the transmitted image sometimes may not be displayed. In this case, refer to the network administrator. • When two network interface cards or more are installed on the PC in use, the network interface card(s) not used for receiving images should be invalidated when displaying MPEG-4 images using the multicast port. 24