Panasonic WVNP244 WVNP244 User Guide - Page 42

[User name] Enter the user name (login name) to access the DDNS server. Number of characters for the user name: 1 - 32 char- acters [Access interval] Select the interval to access the DDNS server to check the IP address and the host name from the following. 1 min/10 min/30 min/1 hour/6 hours/24 hours Default: 1 hour [Password] Enter the password to access the DDNS server. Number of characters for the password: 0 - 32 char- acters Configure the settings relating to SNMP [SNMP] Click the [SNMP] tab on the "Network setup" page. (☞ page 16) The settings relating to SNMP can be configured on this page. It is possible to check the status of the camera by connecting to the SNMP manager. When using the SNMP function, contact the network administrator. [Camera location] Enter the name of the location where the camera is installed. Number of characters for the camera location: 0 - 32 characters Default: (blank) [Community name] Enter the community name to be monitored. Number of characters for the community name: 0 - 32 characters Default: (blank) [Contact (Destination address or phone number of manager)] Enter the mail address or the phone number of the SNMP manager. Number of characters for the destination address or the phone number of manager: 0 - 255 characters Default: (blank) Important: When using the SNMP function, it is necessary to enter the community name. When no community name is entered, the SNMP function will not work. [Camera title] Enter a camera title to be used to manage the camera with the SNMP function. Number of characters for the camera title: 0 - 32 characters Default: (blank) 42