Panasonic WVNP244 WVNP244 User Guide - Page 47

Initialize/restart the camera [Initialization] Click the [Initialization] tab of the "Maintenance" page. (☞ page 16) Initialization of the setup data and HTML files of the camera and restarting of the camera can be performed on this page. [Restart] Click the [Execute] button to restart the camera. The camera will be inoperable for around 1 minute after the restart just as when the power is turned on. [Initialize setup data] Click the [Execute] button to reset the settings to the default settings. However, the network settings will not be reset. It is impossible to operate the camera for around 1 minute after the initialization. Notes: • Turn on the power of the camera while holding down the [INITIAL SET] button of the camera, and wait around 5 seconds without releasing the [INITIAL SET] button. Wait around 30 seconds after releasing the button. The settings including the network settings (☞ page 39) will be initialized. • When the "E-mail notification" function is on, notification mail will be sent to the registered addresses when failed to mount the SD memory card after the restart or when the inserted SD memory card is locked. (☞ page 33) [Initialize HTML data] Click the [Execute] button to reset the HTML files to the default settings. It is impossible to operate the camera for around 1 minute after the initialization. [Initialize setup data and HTML data] Click the [Execute] button to reset the settings and the HTML files to the default settings. However, the network settings will not be reset. It is impossible to operate the camera for around 1 minute after the initialization. 47