Panasonic WVNP244 WVNP244 User Guide - Page 40

[Default gateway] When not using the DHCP function, enter the default gateway of the camera. Default: 192.168.0.1 0 0 255 255 127.0.0.1 Class D address (224.0.0.0 - 239.255.255.255) Class E address (240.0.0.0 - 255.255.255.255) Note: These IP addresses for the default gateway are unavailable even when using the DHCP function. Refer to the network administrator for the settings of the DHCP server. [Line speed] Select the line speed for data transmission from the followings. It is recommended to use with the default setting "AUTO". AUTO/100 MF (Mbps full-duplex)/100 MH (Mbps halfduplex)/10 MF (Mbps full-duplex)/10 MH (Mbps halfduplex) Default: AUTO [FTP access] Select "Allow" or "Forbid" to determine whether to allow or forbid the FTP access. Default: Allow [Total bit rate] Select the total bit rate for data transmission from the followings. 64 kbps/128 kbps/256 kbps/512 kbps/1024 kbps/ 2048 kbps/4096 kbps/Unlimited Default: Unlimited [HTTP port] Assign the port numbers independently. The following port numbers are unavailable since they are already in use. Available port number: 1 - 65535 Default: 80 Notes: • When selecting "64 kbps", select "OFF" for "Mic mode" on the "Audio" tab. (☞ page 26) • When "64 kbps" is selected, it is impossible to carry out the live-transmission of JPEG images and the FTP periodic transmission simultaneously. 20, 21, 23, 25, 42, 53, 67, 68, 69, 110, 123, 161, 162, 995, 10669, 10670 [DNS] Select "AUTO" or "MANUAL" to determine whether or not to use the DNS. When "MANUAL" is selected, it is necessary to configure the settings for the DNS. When using the DHCP function, it is possible to obtain the DNS address automatically by selecting "AUTO". Refer to the network administrator for further information about the settings. Default: MANUAL [Primary DNS], [Secondary DNS] When "MANUAL" is selected for "DNS", enter the IP address of the DNS. Refer to the network administrator about the IP address of the DNS. 40