Panasonic WVSF336 WVSF332 User Guide - Page 26
When using PoE IEEE802.3af compliant, and the network connector of the camera.
![]() |
View all Panasonic WVSF336 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Important: • Be sure to use the power cord plug provided with this product. • Be sure to fully insert the power cord plug into the 12 V DC power supply terminal (accessory). Otherwise, it may damage the camera or cause malfunction. • Be sure to use an AC adaptor compliant with the Specifications regarding power source and power consumption (☞ page 39). t Run the 12 V DC output cable through the gap of the cable hook. 12 V DC output cable Cable hook 12V=IN When using PoE (IEEE802.3af compliant) Connect a LAN cable (category 5 or better, straight, STP*) between a PoE device (such as a hub) and the network connector of the camera. * PAL models only Important: • Use all 4 pairs (8 pins) of the LAN cable. • The maximum cable length is 100 m {328'}. • Make sure that the PoE device in use is compliant with IEEE802.3af standard. • When connecting both the 12 V DC power supply and the PoE device for power supply, PoE will be used for power supply. • When disconnecting the LAN cable once, reconnect the cable after about 2 seconds. When the cable is quickly connected, the power may not be supplied from the PoE device. 26
![](/manual_guide/products/panasonic-wvsf332-wvsf332-user-guide-88bef06/26.png)