Pentax 645D Limited Edition Operation Manual - Page 45
Recorded, Pixels/Quality, Level
View all Pentax 645D Limited Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
2 Turn the %Ir. dial while pressing the SD2 button. Configure the setting for the SD Memory Card in the SD2 slot in the same manner. KO Caution • Depending on the setting and condition for storing the data, when one or both of the SD Memory Cards become full and no more images can be saved, an error message appears and the shutter locks. • When [JPEG] or [RAW+] is set for both cards, the JPEG images saved to both cards have the same [JPEG Recorded Pixels] and [JPEG Quality] settings. Memo • You can check the data saving status for each slot on the status screen (p.15), LCD panel (p.22) and in the viewfinder (p.2O). JPEG Recorded Pixels/Quality Level When [JPEG] is selected as the file format, set the recorded pixels and quality level (*** Best, ** Better, and * Good). This does not have to be set when [RAW] is selected as the file format. Setting L M S Recorded Pixels 40M1 32i 21mi 13PAI 7M Pixels 7264x5440 6528x4896 5376x4032 4224x3168 3072x2304 Set the recorded pixels for M and S with [35. M and S Pixel Resolution] in the [C5] menu. (CD p.R35) Turn the dial while pressing the SD1/SD2 button. The setting changes in the following sequence: L * * * (default setting). L**, L*, M***, M**, M*. S***, S**, S*. • Memo • If you set [JPEG] or [RAW+] for both cards, when either the SD1 or SD2 button is used to set the recorded pixels and quality level, both cards will have the same settings. 43 suopound 6u400qg