Pentax 645D Limited Edition Operation Manual - Page 60
Flash
View all Pentax 645D Limited Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Flash Mode Attaching a Flash I Remove the hot shoe cover of the camera. 2 Attach the flash and turn on the camera. Memo • Press the button to discharge the flash in Modeling Flash or Test Flash mode. Set this with [34. External Flash Discharge] in the [C5] menu. (MI p.R35) I Using a Sync Cord You can connect a sync cord to the X-sync socket on the camera. Caution Do not use high-voltage or high-current external flashes. They may cause the camera to malfunction. A flash with reversed polarity (the center of the hot shoe or sync plug has a negative symbol) cannot be used, as this may damage the camera or flash. • Linked functions will not work. • To prevent vignetting caused by Trailing Curtain Sync from occurring, it is recommended to take a test shot using a shutter speed one stop slower than the flash sync speed. • The contact of the X-sync socket is not dust-proof or waterresistant. Attach the provided Sync socket 2P cap when not in use. Setting the Flash Mode The following flash modes are available. The flash modes that are available differ depending on the exposure mode. Flash Mode Flash On Flash On+Red-eye Reduction Slow-speed Sync Slow-speed Sync+Red-eye Available Exposure Modes P/SviTv/AviTAv/M/BIX P/Sv/Av 58