Pentax K-x Black K-x Black K-x Manual - Page 188

186 6 Press the 4 button. The white balance fine-tuning screen appears when measuring is completed. Adjust the white balance as necessary. (p.186) Manual White Balance SHUTTER Adjust G ±0 ±0 ±0 MENU Cancel B A M INFO Check OK OK 7 Press the 4 button. The camera returns to the [White Balance] screen. 8 Press the 4 button. The camera is ready to take a picture. • No image is recorded when the shutter release button is pressed to adjust the white balance. • The message [The operation could not be completed correctly] appears 6 when measuring is unsuccessful. Press the 4 button while displayed to remeasure the white balance. • If the picture is extremely overexposed or underexposed, the white balance may not be adjusted. In this case, adjust to the proper exposure before adjusting the white balance. • When the mode dial is set to C (Movie), the white balance cannot be measured. Adjust the white balance in any capture mode other than C before recording a movie. Shooting Settings Fine-Tuning the White Balance You can fine-tune the white balance settings. 1 Perform the desired setting in Step 3 on p.183. 2 Press the four-way controller (5). The fine-tuning screen appears.