Pentax K200D User Manual - Page 118
Press the shutter release button fully.
UPC - 027075139855
View all Pentax K200D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
116 3 Use the four-way controller (45) to select g. Drive Mode Continuous shooting (Hi) Shooting Functions OK OK 4 Press the four-way controller (3) and use the four-way controller (45) to select g or h. 5 Press the 4 button. 4 The camera is ready to take pictures continuously. 6 Press the shutter release button halfway. The autofocus system operates. The focus indicator ] appears in the viewfinder when focused. 7 Press the shutter release button fully. Pictures are taken continuously while the shutter release button is fully pressed. Take your finger off the shutter release button to stop. • If the AF mode is set to l (Single mode), the focus position is locked on the first frame and pictures are taken continuously at the same interval. • Focusing is continuously active when the AF Mode is set to k (Continuous mode), when Picture mode is set to \ (Moving Object) or H mode is set to C (Kids) or E (Pet). Note that the shutter will be released even if the focusing is not complete. • The shutter cannot be released until charging is complete when using the built-in flash. You can set the camera to enable shutter release before the built-in flash is ready in [15. Release when Charging] in the [A Custom Setting] menu. (p.129) • Select a setting other than g or h in the [Drive Mode] screen to cancel continuous shooting. The setting is canceled when the camera is turned off if [Drive Mode] in [Memory] (p.217) of the [A Rec. Mode] menu is set to P (Off).