Pentax K200D User Manual - Page 247

245 Problem Cause Remedy The Shake Reduction function Turn on the Shake Reduction switch. (p.68) is off The Shake Reduction function is not set properly If a lens for which focal length information cannot be acquired is used, set the [Focal Length] on the [Input Focal Length] menu. (p.69) Shake Reduction does not work Shutter speed is too low for the Shake Reduction function to be effective when panning or shooting night scenes, etc. Turn off the Shake Reduction function and use a tripod. The subject is too Move away from the subject, or turn off the close Shake Reduction function and use a tripod. In rare cases, the camera may not operate correctly due to static electricity. This can be remedied by taking the batteries out and putting them back in again. When the mirror remains in the up position, take the batteries out and put them back in again. Then, turn the power on. The mirror will retract. After the procedure is done, if the camera operates correctly, it does not require any repairs. 12 Appendix