Pentax K200D User Manual - Page 130
Compensating Flash Output
UPC - 027075139855
View all Pentax K200D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
128 Compensating Flash Output You can change the flash output in a range of -2.0 to +1.0. The flash compensation values are as follows for 1/2 EV and 1/3 EV. Step interval Flash compensation 1/2 EV -2.0, -1.5, -1.0, -0.5, 0.0, +0.5, +1.0 1/3 EV -2.0, -1.7, -1.3, -1.0, -0.7, -0.3, 0.0, +0.3, +0.7, +1.0 * Set interval of steps in [1. EV Steps] (p.101) in the [A Custom Setting] menu. Set the flash compensation value by turning the e-dial in the [Flash Mode] screen in the Fn menu (p.77). 5 Flash Mode Auto discharge 0.0 OK OK • If the maximum flash output is exceeded when corrected to the plus (+) side, no compensation will be effective. • Compensating to the minus (-) side may not effect the image if the subject is too close, aperture is low or sensitivity is high. • This flash compensation is also effective for external flash units which support P-TTL auto flash mode. • Pressing the Green button on the [Flash Mode] screen resets the flash exposure compensation to the default setting [0.0]. Using the Flash