Pentax Optio H90 White Optio H90 Orange Optio H90 - Page 127

Saving the Settings (Memory) The Memory function is for saving the current camera settings when the camera is turned off. For some camera settings, the Memory function is always set to O (On) (the settings are saved when the camera is turned off), while for others you can choose on or off (to choose whether the settings are saved or not when the camera is turned off). The items which can be set to O (On) or P (Off) in the Memory function are shown in the table below. (Items not listed here are always saved in the selected settings when the camera is turned off.) 3 If you select O (On), the settings will be saved in the status they were in immediately before the camera was turned off. If you select P (Off), the settings will be reset to the defaults when the camera is turned off. The table below also shows whether the Memory default setting for each item is on or off. Taking Pictures Item Description Default Setting Page Face Detection The Face Detection mode set by using the I button P p.72 Flash Mode The flash mode set with the four-way controller (4) O p.99 Drive Mode The drive mode set with the four-way controller (2) P p.91 p.92 Focus Mode The focus mode set with the four-way controller (5) P p.101 Zoom Position The zoom position set with the zoom button P p.78 MF Position The manual focus position set with the four-way controller (23) White Balance The [White Balance] setting on the [A Rec. Mode] menu P p.102 P p.108 Sensitivity The [Sensitivity] setting on the [A Rec. Mode] menu P p.112 EV The [EV Compensation] setting on the Compensation [A Rec. Mode] menu P p.106 AE Metering Digital Zoom The [AE Metering] setting on the [A Rec. Mode] menu The [Digital Zoom] setting on the [A Rec. Mode] menu P p.110 O p.79 DISPLAY The information display mode set with the 4/W button P p.20 File No. If a new SD Memory Card is inserted when O (On) has been selected, file numbers are assigned O- sequentially 125