Pentax ZX-5N ZX-5n Manual - Page 39
photograph.
UPC - 027075042032
View all Pentax ZX-5N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
(8) TAKING A PICTURE 1 2 Set the focus mode switch to [ AF ]. 1. Focus on the subject with the 3-point AF frame [C 3] indicated in red in the photograph. When the shutter release button is depressed halfway down, the lens automatically focuses. 2. When the subject is in focus, the focus indicator [0] lights up and an audible PCV beeping signal is emitted. • As this camera incorporates 3-point autofocus sys- tem, the subject will be focused properly even if the subject is slightly off the center of the AF frame. • Select the Spot AF Mode to focus on a particular spot in the frame. See page 65. • When the shutter release button is depressed half- way down, the shutter speed and aperture setting are displayed in the viewfinder and on the LCD panel. • When blinks in the viewfinder and on the LCD panel, the use of the built-in flash is recommended. 5 n0 l For more details on the built-in flash, see page 37. • The audible PCV signal can be turned off. See details on page 71. • During autofocus operation, the focusing ring should 0 z not be obstructed with your fingers, hands, or any other object. 0 The focus indicator [0] blinks when the camera is not able to obtain proper focus for one of the following reasons. 1. The subject is too close. Adjust the camera-tosubject distance. 2. The subject is difficult to autofocus. See "HARD-TOAUTOFOCUS" on page 51.