Pfaff Tiptronic 2030 Owner's Manual - Page 118
zigzag stitch
View all Pfaff Tiptronic 2030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
I A!! Manual change! Regular pattern - Apply iron-on backing or other stabilizer under fabric. - Set needle thread tension to 3. Select the zigzag stitch needle position (Prog. 1 2), Pressing the "Pattern mirror key" (39) will ' change the stitch from a right (C) to left (A) needle position stitch. Zigzag stitch 3 is used when a center (B) needle position motif is desired. - Set stitch length to 0.2 mm. With key pair a increase the width while - sewing from 0 to 6 mm and reduce it again to0mm. 2' Note: If you have selected the right or left needle position, the stitch width only changes in one direction. Manual change! Irregular pattern - Apply iron-on backing or other stabilizer under fabric. - Set needle thread tension to 3. Select zigzag stitch 1 2 for motifs with a right or left needle position or zigzag stitch 3 for motifs with a center needle position. - Set stitch length to 0.2 - 0.3 mm. - Using key pair a increase and reduce the width while sewing. Note: If you have selected the right or left needle position, the stitch width only changes in one direction. 1 24