Pfaff Tiptronic 2030 Owner's Manual - Page 6
Notes, safety, domestic, sewing, machines, accordance, and/or - sewing machines
View all Pfaff Tiptronic 2030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Notes on safety for domestic sewing machines in accordance with EN 60335-2-28 and/or IEC 335-2-28 1. The user must exercise adequate caution with regard to the up and down movement of the needle and constantly observe the sewing area while working. 2. When leaving the machine, during maintenance work or when changing mechanical parts or accessories, always disconnect the machine from the mains by pulling out the mains plug. 3. The maximum permissable wattage for the sewing lamp is 1 5 watts. 4. The tension of the drive belt may only be adjusted by a PFAFF mechanic. 5. The machine is to be put into operation according to the indications on the specification plate. 6. Do not place any objects in openings on the machine. 7. Do not use the sewing machine if: - there is visible damage - its function is disturbed - it is wet, e.g. with condensation, that may be caused by introducing a cold machine into a warm room. 8. Do not pull the mains plug out of the socket by its cord. 9. No liability will be accepted for any damage caused if this machine is used forany purpose other than that for which it is intended or if it is operated incorrectly. I 0.To avoid the risk of electric shock, do not open the machine. There are no parts inside the machine which the user can repair. This is solely the responsibility of our qualified service staff. I 1.Only original PFAFF parts may be used. I 2.The machine is designed for a mains supply with a mains rated voltage of +7- 10% and a rated frequency of +1- 4%. I 3. During conventional use, the outer parts of a non-electrically driven foot control can heat up to 85°C. Constant use at low speeds is not permissible, in order to avoid damage due to over-heating. 14. According to the laws concerning electromagnetic compatibility, no liability can be accepted for any mains interruptions caused, should the mains power line be changed or should changes be made to it. Environment he recommended environment is: mbient temperature 1 0°C to 40°C Jr humidity 20% to 80%. loom temperature - 25°C to + 60°C he machine is suppressed and insensitive to interference according to international conven ons; however, it should not be operated in the direct vicinity of electronic devices. his sewing machine is a high-quality electronic-mechanical appliance; it is a machine for upervised use in the home. It should be operated in such a way that it is not subjected to: ust, severe dampness, direct sunlight, static electricity, heat-producing objects, corrosive hemicals or liquids. he machine is to be used on a firm and even surface which is open for ventilation purposes. reatment Iways protect the machine against damage which could be caused by it being hit or dropped. leaning ousing and display: To clean the housing use a dry, clean, soft, lint-free cloth. To remove ny stubborn dirt, use a soft cloth moistened with alcohol. lease note! o not use any insecticides or chemical products such as petrol or liquid chemicals to clean e housing.