Pfaff creative 1475CD Manual part 2 - Page 34
Stretch, buttonhole, reinforced, Correcting, buttonhole, Changing, width, Adapting, ength, balance
View all Pfaff creative 1475CD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
a- (C [:Ii LiJ 'ii Ii prog () & /4v I, Qo, Stretch buttonhole, reinforced (fully automatic) prog 151 -- -3+ 5A Sewing thread: embroidery and darning thread 18 buttonhole lengths are stored in the comput er, from 10 to 44 mm. On program selection, a programmed buttonhole length of 22mm and a buttonhole width of 4.5mm appear in the display. Select the required length of buttonhole with stitch-length keys 7 (Fig. 1). The machine automatically sews the selected buttonhole. Before beginning the buttonhole pull the runner of the buttonhole foot fully to the front. Correcting a buttonhole If a buttonhole does not turn out well, cancel it with "pattern start" key 26 and sew it again. Changing the buttonhole width For every type of fabric the corresponding but tonhole width can be determined up to 5.5 mm. For heavy fabrics select a wide buttonhole and for light fabrics a narrow one. At stitch width keys 8 you can set the required width. The width of the area of cut changes automatically (Fig. 5). The stored buttonhole width is 4.5 mm. Adapting the buttonhole seam 'ength with the balance keys With "balance" keys 5 the left buttonhole sean length can be adapted to the right one. Make a sample buttonhole first. Example: If the left seam is too short (Fig. 4a) Select +1 to +3 with "balance" key 5, or more, required. If the left seam is too long (Fig. 4b) Select -ito -2 with "balance" key 5, or more, required. • Sew the first buttonhole seam at the lengt required and • the first bartack. • Press balance keys 5, '+" or"-", and adjust th second buttonhole seam length to the first on (Figs. 4a, 4b). • Sew final bartack. The change made in this way will be mair tamed for the following buttonholes. -