Pfaff creative 1475CD Manual part 2 - Page 54

1 Appliqué work Two worksteps are required for this work: ri- First workstep 10 2-3 2A Stitch width: 0.5 mm Stitch length: 1.0 mm Second workstep I prog -- 10 E 2-3 2A Stitch width: 1.5 mm Stitch length: 0.2 to 0.25 mm (for cording) Trace the design on the reverse side of the fabric, lay the appliqué on the face side and baste it on, making sure it matches the fabric grain. First workstep Sew along the outline of the design on the reverse fabric side (Fig. 1). Trim excess material close to the contour seam (Fig. 2). Second workstep Sew over the raw edges of the appliqué (single needle cording). To make the edge of the appliqué more prom nent, insert a gimp thread in the seam (Fig. 3). Ready-made fabric appliqués can be applie much more easily. Before you cut out the desigr iron on a fusible backing. This reinforces the mate rial, makes it easier to cut, and prevents frayinc Pin on the design and sew along the edges of th design with dense, narrow zigzag stitches. Fc cording underlay reverse fabric side with paper. I this way, a good-looking seam is produced. • For cording we recommend the appliqué fcc (special accessory)