Pfaff creative 1475CD Manual part 2 - Page 58

nserting lace or this work, two worksteps are required First workstep prog --] -- 00 KKj-3+ OA - Second workstep pr0g -- -3+ First workstep The lace insert is first secured to the material face side and is sewn on at a narrow margin with straight stitch. The material underneath the lace is cut open in the middle and ironed to the sides. Second workstep Sew over the lace edge on both sides with small, dense zigzag-stitches from the face side. Cut off the excess material on the reverse side (Fig. 1). Attaching lace For this work, two worksteps are required First workstep prog 10 KKj-± oA Stitch width: 5.0 mm Stitch length: 1.5 mm EELEEEwP+ Second workstep ÷ Stitch length: 3.0 mm First workstep Serge the raw edge with zigzag stitches (Fig. 2) Second workstep Pin the lace on the face side of the fabric and se it on (Fig. 3). Secure the corners with stitches. 120