Pfaff creative 2.0 Owner's Manual - Page 8

Presser feet - sewing and embroidery machine

Get Pfaff creative 2.0 PDF manuals and user guides View all Pfaff creative 2.0 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

Introduction Presser feet Standard presser foot 0A with IDT (attached on the machine upon delivery) This foot is used mainly for straight stitching and zigzag stitching with a stitch length longer than 1.0 mm. Fancy stitch foot 1A with IDT This foot is used for decorative stitches. The groove on the underside of the foot is designed to Áow smoothly over the stitches. Fancy stitch foot 2A When sewing decorative stitches or short zigzag stitches and other utility stitches with less than 1.0mm stitch length, use this foot. The groove on the underside of the foot is designed to Áow smoothly over the stitches. Blindhem foot 3 with IDT This foot is used for blindhem stitches. The toe on the foot guides the fabric. The red guide on the foot is designed to ride along the fold of the hem edge. Zipper foot 4 with IDT This foot can be snapped on either the right or the left of the needle, making it easy to sew close to both sides of the zipper teeth. Move the needle position to the right or left to sew closer to zipper teeth. Sensormatic buttonhole foot 5A When connected to the machine, the buttonhole is sewn in a suitable length to the button size that has been entered into the machine. Used to sew buttonholes up to 50 mm. Manual buttonhole foot 5M This foot is used for sewing manual buttonholes longer than 50 mm. Use the markings on the foot to position the garment edge. The Ànger on the back of the foot holds cording for corded buttonhole. Embroidery/Sensormatic free-motion foot 6A This foot is used for embroidery and sensormatic free-motion sewing. This foot can also be used for darning. Rolled hem foot 7 with IDT, 3 mm This foot is used to sew narrow hems in light to medium weight fabric. Important: Make sure that the IDT is disengaged when using presser foot 2A, 5A, 5M and 6A. 1:8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
Introduction
Presser feet
Standard presser foot 0A with IDT (attached on the machine upon delivery)
This foot is used mainly for straight stitching and zigzag stitching with a stitch
length longer than 1.0 mm.
Fancy stitch foot 1A with IDT
This foot is used for decorative stitches. The groove on the underside of the foot
is designed to
Á
ow smoothly over the stitches.
Fancy stitch foot 2A
When sewing decorative stitches or short zigzag stitches and other utility stitches
with less than 1.0mm stitch length, use this foot. The groove on the underside of
the foot is designed to
Á
ow smoothly over the stitches.
Blindhem foot 3 with IDT
This foot is used for blindhem stitches. The toe on the foot guides the fabric. The
red guide on the foot is designed to ride along the fold of the hem edge.
Zipper foot 4 with IDT
This foot can be snapped on either the right or the left of the needle, making it
easy to sew close to both sides of the zipper teeth. Move the needle position to
the right or left to sew closer to zipper teeth.
Sensormatic buttonhole foot 5A
When connected to the machine, the buttonhole is sewn in a suitable length to
the button size that has been entered into the machine. Used to sew buttonholes
up to 50 mm.
Manual buttonhole foot 5M
This foot is used for sewing manual buttonholes longer than 50 mm. Use the
markings on the foot to position the garment edge. The
À
nger on the back of the
foot holds cording for corded buttonhole.
Embroidery/Sensormatic free-motion foot 6A
This foot is used for embroidery and sensormatic free-motion sewing. This foot
can also be used for darning.
Rolled hem foot 7 with IDT, 3 mm
This foot is used to sew narrow hems in light to medium weight fabric.
Important: Make sure that the IDT is disengaged when using presser foot 2A, 5A, 5M and 6A.
1:8