Pfaff creative 7560 Owner's Manual - Page 41
edges, Program, trimmings, corners
View all Pfaff creative 7560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Lace trimmings You can beautify table cloths, napkins or even garments with lace trimmings. Lace edges Program 02 Program 00 Serge the raw edges of the fabric with zigzag or overlock stitches. Place the lace onto the fabric so that the edges of the fabric and lace overlap slightly. Then stitch the lace onto the face side. You can achieve a particularly flat seam if you are joining lace and fabric with a covering stitch. In this case, the lace and fabric edges should also overlap slightly. As the covering stitch will serge the fabric edge at the same time, you only need to cut back the waste material carefully along the seam. Lace edges with corners Program 02 Program 00 First serge the raw edges. Stitch the lace onto the face side up to the first corner. Fold the corner and stitch over it diagonally. Sew the lace continuously onto the next edge. All other sides are done in the same way. Lace inserts Program 02 Program 00 First baste the lace to the face side of the fabric. Stitch both edges of the lace at a narrow margin using straight stitch 00. Cut open the fabric under the lace at the middle and iron it over to the side. Stitch over both edges of the lace with small and dense zigzag stitches. Cut back the waste material on the wrong side of the lace. 77