Pfaff creative 7560 Owner's Manual - Page 68
hoop., fabric, threads
View all Pfaff creative 7560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
And this is how it is done: • Remove the sewing foot. • Place the eyelet plate onto the needle plate making sure that pin A fits into the middle cutout of the needle plate. Then push the eyelet plate down at the front. • Place the marked fabric taut in an embroidery hoop. • Cut one or two fabric threads with a small pair of scissors and push the fabric over the pin in the eyelet plate.The fabric must fit tightly around the pin. • Place the sewing foot lifter in darning position. • Pull up the bobbin thread and hold it for the first few stitches. • Stitch around the cut with the selected program.While doing so, turn the hoop with the fabric slowly and evenly. The stitches must be very close to each other. • Then secure with a few straight stitches. The pattern examples are composed as follows: A E Prog = program number = pattern length C Ei = stitch width Prog B F D F 133