Pfaff creative vision 5.5 Owner's Manual - Page 56

Speed control (18) 18 This function enables you to easily reduce the maximum sewing speed. Just touch the speed control icon to reduce the speed. To return to normal speed, deselect the icon. You can change the set speed limit. Long touch the speed control icon to get a pop-up. Set the speed limit you would like by sliding the button right or left and then close the pop-up. The next time you touch the speed control icon, the speed will be reduced to the limit you have chosen. You can sew without closing the pop-up. Note: If selecting the highest speed in the slider, it is like choosing no speed limit at all. The icon in the option bar will then be deselected and the speed limit will be set to default. Sewing programs (19) 19 Sewing programs - overview A Tapering program B Single stitch program C Patchwork program D Preview Àeld E Set number of stitch repetitions in single stitch program Note: Not all programs can be used at the same time. You can sew without closing this pop-up. A B C E D Sewing mode Tapering program (A) Tapering increases or decreases the width of the stitch during sewing to create symmetrical or A asymmetrical tapers. Activate tapering by selecting any of the tapering icons (A). The default angle is 45 degrees. Long touch the tapering icon to open a window with different angle choices. Touch the angle you want for your taper. If tapering is deactivated and then activated again, the angle will be set to the previously selected angle. When tapering is activated at both the beginning and at the end and you start to sew, the stitch width will start at 0mm. It becomes wider until the selected stitch width is reached. Sew your desired length and press the reverse button. The width is reduced until the width is 0mm and the action indicator on the machine will be lit until the taper is Ànished. 4:6