Pfaff expression 2044 Owner's Manual - Page 116

maintenance

Get Pfaff expression 2044 PDF manuals and user guides View all Pfaff expression 2044 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 116 highlights

I IL _- Changing the needle plate Switch off the main switch. Removal • Raise the presser foot. Position the needle plate changer (lamp changer) as shown and press the needle plate up on the right, then on the left. It can now be easily removed Replacing • oPulat ctehetnheprneesesdldeowplnataet against the rear edge of the cutthe front until you hear it snap in place. Before you start sewing, check that the needle plate is lying flat. Tip Lower the feed dog to make removing the needle plate easier. Cleaning and oiling • Switch off the main switch. • Remove the needle plate and lower the feed dog. Clean the feed dog and hook area with the brush. • Apply only one drop of oil to the area in the hook shown above. The machine otherwise requires no maintenance and must not be oiled at any other points. • Clean and oil the sewing machine every 10- 15 hours of operation. Cleaning the display Wipe the display with a soft, lint-free dry cloth. DO NOT use aggressive cleansers or solvents! 112

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
Changing
the
needle
plate
Switch
off
the
main
switch.
Removal
•
Raise
the
presser
foot.
Position
the
needle
plate
changer
(lamp
changer)
as
shown
and
press
the
needle
plate
up
on
the
right,
then
on
the
left.
It
can
now
be
easily
removed
_-
Replacing
•
Place
the
needle
plate
against
the
rear
edge
of
the
cut-
out
then
press
down
at
the
front
until
you
hear
it
snap
in
place.
Before
you
start
sewing,
check
that
the
needle
plate
is
lying
flat.
Tip
Lower
the
feed
dog
to
make
removing
the
needle
plate
easier.
Cleaning
and
oiling
•
Switch
off
the
main
switch.
•
Remove
the
needle
plate
and
lower
the
feed
dog.
Clean
the
feed
dog
and
hook
area
with
the
brush.
•
Apply
only
one
drop
of
oil
to
the
area
in
the
hook
shown
above.
The
machine
otherwise
requires
no
maintenance
and
must
not
be
oiled
at
any
other
points.
•
Clean
and
oil
the
sewing
machine
every
10-
15
hours
of
operation.
Cleaning
the
display
Wipe
the
display
with
a
soft,
lint-free
dry
cloth.
DO
NOT
use
aggressive
cleansers
or
solvents!
I
IL
112