Philips MX5600D User manual - Page 41

English Timer Operations Setting the timer The system can switch on to DISC or TUNER mode automatically at a preset time, serving as an alarm to wake you up. IMPORTANT! - Before setting the timer, ensure that the clock is set correctly. - The volume of the timer will increase gradually to the last tuned volume level. If the last tuned volume level is too low, the set will then increase to a predetermined minimum audible level. buttons on front panel CLOCK•TIMER 2 DVD system's display panel SELECT CLOCK OR TIMER CLOCK•TIMER 3 SOURCE 4 SEARCH 5 CLOCK•TIMER 6 TIMER 12:00AM TUNER 12:00AM DISC 10:38AM DISC 1 Press STANDBY ON to switch on the DVD system. 2 Press and hold CLOCK•TIMER until "SELECT CLOCK OR TIMER" appears. 3 Press T (if necessary) to change the display to "TIMER," then press CLOCK•TIMER again to confirm. 4 Adjust SOURCE (or press DISC/MEDIA or TUNER on the remote) to select the wake up source (DISC or TUNER.) 5 Press S / T to set the wake up time (minutes and hours.) To increase the speed, hold down S or T. ➜ The changes in minutes will roll over to the hours. 6 Press CLOCK•TIMER again to store the setting. ➜ Once the timer is set, it will always switch on unless you deactivate it. ➜ icon will remain on the display panel. It indicates the timer is activated. G At the preset time, the selected sound source will play for 30 minutes before it switches to Eco Power standby mode (if no button is being pressed within the time frame.) ➜ DISC - the first track of the last selected disc will be played. If the last selected disc tray is empty, it will switch to the next available disc. If all the disc trays are not available, it will switch to Tuner mode. ➜ TUNER - the last tuned radio station will be played. Activating/Deactivating the timer 1 Repeat steps 1~3 of "Setting the timer." 2 Press Ç to turn off the timer. ➜ icon will disappear from the display panel and "TIMER OFF" appears. OR Press CLOCK•TIMER to turn on the timer to the last setting. ➜ The timer information will display for a few seconds, then the system resumes its last active source or stays in standby mode. Note: - The system will exit timer setting mode if no button is pressed within 90 seconds. 39