Pioneer 310-S Owner's Manual - Page 47

Recording 06 2 Select 'New Input' to set a new timer program, then press ENTER. Timer Recording Date Start Stop CH 12/12 TUE 10 00 AM 11 00 AM 26 Rec Mode SP Recorded Title Name Input • If a timer program overlaps another in the list, the message Overlap appears. • If no recordable disc is loaded, the message Can't Rec appears. • 6 Hour Over is displayed if a recording over 6 hours is set. 5 To exit the timer recording screen, press HOME MENU. 3 Enter the timer recording settings. Use the / (cursor left/right) buttons to select a field; use the / (cursor up/down) buttons to change the value. • Date - Choose a date up to one month in advance, or select a daily or weekly program. • Start - Set the recording start time. • Stop - Set the recording end time (maximum length of a timer recording is 6 hours). • CH - Choose a channel (2-69 or 1-125 for antenna or cable channels respectively, excluding skip channels), or one of the external inputs from which to record. • Mode - Select FINE, SP, LP or EP (See Setting the picture quality/recording time on page 43). If Manual Recording is on, then you can also select the MN setting. • Recorded Title Name - Optionally, you can enter a name for the recording up to 32 characters. 4 After entering all the timer recording information, press ENTER. The main timer recording screen is displayed again. The timer program you just input appears in the list. • The rightmost column in the timer recording screen (Result) shows whether there's enough space to record your timer program. If you selected a daily or weekly program, the date of the last recording that will fit on the disc appears (up to a maximum of one month ahead). • If the timer program is too long to fit into the available disc space, the message Time Over appears. The program will record until the disc is full. • If there are already the maximum number of titles or chapters on the disc, the message Title Over or Data Over appears. (There can be up to 99 titles on a disc.) • If Optimized Rec (see Optimized Rec on page 78) is set to On, the recorder will adjust the recording quality to try and fit the recording on the disc. If the program is too long even when recorded in EP (extended play), the message Time Over appears. Timer recording using the VCR Plus+® programming system This system makes programming timer recordings very simple. Most TV guides publish PlusCode numbers with their program details. If you want to make a timer recording of a program, you just input the corresponding code. The date, start, stop and channel settings are made automatically. All you have to do is tell the recorder the recording mode, and whether it's a once-only recording or a regular recording. VCR Plus+ CLEAR ENTER HOME MENU REC MODE ì 1 Press 'VCR Plus+' to display the VCR Plus+ program screen. You can also access this screen from the Home Menu (press HOME MENU, select Timer Recording, then VCR Plus+). VCR Plus+ PlusCode# 3 9 9 2 4 0 9 to input Rec Mode MN21 REC MODE to change to change level Rec Times Once Daily Weekly to change 47 En