Pioneer 310-S Owner's Manual - Page 75
The Initial Setup menu, Audio Out settings
UPC - 012562656816
View all Pioneer 310-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
The Initial Setup menu 12 DV Input • Default setting: Stereo1 You need to set this if you have a camcorder using 32kHz/ 12-bit sound connected to the front panel DV IN/OUT jack. Note • When set to Off, all the other Audio Out settings are grayed out and can't be set. Initial Setup Basic Tuner Video Out Audio In Audio Out Language Recording Playback External Audio Dual Mono Recording DV Input Input Level (L1) Input Level (L2) Input Level (L3) Stereo1 Stereo2 Mix (Stereo1: 75%) Mix (Stereo1: 50%) Mix (Stereo1: 25%) Some digital camcorders have two stereo tracks for audio. One is recorded at the time of shooting; the other is for overdubbing after shooting. On the Stereo1 setting, the sound that was recorded while shooting is used. On the Stereo2 setting, the overdubbed sound is used. You can also choose a Mix setting of 25%, 50% or 75% for the Stereo 1 with a corresponding Stereo 2 setting of 75%, 50% or 25%. Input Level (L1 / L2 / L3) • Default setting: 0dB Dolby Digital Out You only need to make this setting if you connected this recorder to an AV amplifier (or other component) using the digital output. • Default setting: Dolby Digital Initial Setup Basic Tuner Video Out Audio In Audio Out Language Recording Playback Digital Out Dolby Digital Out DTS Out 96kHz PCM Out MPEG Out Dolby Digital Dolby Digital PCM If your AV receiver (or other connected component) is Dolby Digital compatible, set to Dolby Digital, otherwise set to Dolby Digital PCM. Check the manual that came with the connected component if you're unsure whether it is Dolby Digital compatible. Initial Setup Basic Tuner Video Out Audio In Audio Out Language Recording Playback External Audio Dual Mono Recording DV Input Input Level (L1) Input Level (L2) Input Level (L3) +6dB +3dB 0dB - 3dB - 6dB You can adjust the gain of the audio from each external input individually, from -6dB to +6dB in steps of 3 dB to optimize the recorded audio level. DTS Out You only need to make this setting if you connected this recorder to an AV amplifier (or other component) using the digital output. • Default setting: On Initial Setup Basic Digital Out On Tuner Dolby Digital Out Off Video Out DTS Out Audio In 96kHz PCM Out Audio Out MPEG Out Language Recording Playback Audio Out settings Digital Out • Default setting: On If your AV receiver (or other connected component) has a built-in DTS decoder, set to On, otherwise set to Off. Check the manual that came with the connected component if you're unsure whether it is DTS compatible. Initial Setup Basic Digital Out On Tuner Dolby Digital Out Off Video Out DTS Out Audio In 96kHz PCM Out Audio Out MPEG Out Language Recording Playback If at any time you need to switch off the digital audio output, set this to Off, otherwise leave it On. Important • If you set to On with a non-DTS compatible amplifier, noise will be output when you play a DTS disc. • When set to On, there is no analog audio output when playing a DTS DVD-Video disc. • When playing a DTS audio CD (even when DTS Out is Off), noise is output from the analog outputs. Do not play this through your amplifier and speakers. 75 En