Pioneer 607CMX Technical Manual - Page 58

Video Card: PDA-5003/PDA-5004 4.3.7 Connection to INPUT2 A computer equipped with DVI output (digital RGB signal) or an AV component equipped with DVI output, can be connected to the Plasma Display's DVI connector. INPUT2 DIGITAL RGB (DVI-D) 4.3.9 Connection to INPUT4 Connect an AV component that has a video output jack to the video card's INPUT4 jack. The VIDEO OUT (INPUT4) jack can be used to output the video signal to a separate monitor, recording device or other component with video input capability. Note A video signal will not be output from the VIDEO OUT (INPUT4) jack when the main power of this display is off or in standby mode. [When using PDA-5003] VIDEO INPUT4 IN OUT Computer or AV component On-screen setup is necessary after connection. Note Use a DVI-D 24-pin (digital only) cable for the connection. NOTICE ¶ INPUT2 is compatible with Microsoft's Plug & Play (VESA DDC 2B). ¶ For screen sizes and input signals compatible with INPUT2, please refer to the Plasma Display's Operation Instructions. 4.3.8 Connection to INPUT3 Connect an AV component that has S-video output jack to the video card's S-VIDEO (INPUT3) jack. S-VIDEO INPUT3 [When using PDA-5004] VIDEO INPUT4 IN OUT To a monitor or a recording device AV component To a monitor or a recording device AV component AV component Signals to the INPUT3 and INPUT4 jacks are all compatible with the following TV systems: NTSC, PAL, SECAM, 4.43NTSC, PAL M and PAL N. 58