Pioneer 607CMX Technical Manual - Page 74
Installation on the Plasma Display
UPC - 012562824413
View all Pioneer 607CMX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Speaker System: PDP-S55-LR 4.6.3 Installation on the Plasma Display 1) Installation procedure Install the speaker system according to the steps 1 through 5. Note: The speakers are divided into a right (R) and left (L) speaker. When attaching the speakers, be sure to check to labels (R/L) located on the rear of the speakers. 3 Loosely screwing the screws (M5) into place on the top attachment pieces (two locations). Note: To install the Plasma Display on a wall, first attach the attachment pieces to the Plasma Display then install it on the wall. After installing the Plasma Display on the wall, it may be impossible to tighten the screws on the attachment pieces. 1 Remove the seals from the cushions and then attach the cushions to the sides of the speakers in the locations indicated in the diagram below. Cushions 2 Attaching the attachment pieces to the locations shown in the drawing of the Plasma Display with screws (M5) (eight locations). Check the marks on the attachment pieces (TL, TR, BL, BR) and the Plasma Display attachment locations. 4 Attaching the screws (M5) that have been loosely screwed into place on the hooks on top of the speakers. Loosely screw the screws (M5) into place with the screw holes on the attachment pieces on the bottom aligned with the holes in the hooks on the bottom of the speakers. 74