Pioneer 9000 Owner's Manual - Page 62
Adjusting Audio Basic
UPC - 012562585574
View all Pioneer 9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Adjusting Audio (Basic) 3. Select the speaker you want to make adjustments to by moving the joystick. The currently selected speaker is highlighted in green. 4. Click the joystick. and are displayed and you can set the size and the level for the selected speaker. 5. Select the correct size for the selected speaker in use by moving the joystick left/right. Select the speaker settings as follows: Speakers Front (Left & Right) Rear (Left & Right) Center Sub Woofer Setting SMALL/LARGE OFF/SMALL/LARGE OFF/SMALL/LARGE OFF/ON Size Level Note: • The Front Left and Right speakers cannot be set differently. The same is true for the Rear Left and Right. 6. Adjust the speaker for output level by moving the joystick up/down. When you make adjustments for listening position, the speakers are automatically set for appropriate output levels. You can tailor them if you want as discussed under the heading of "Adjusting the Speakers' Output Levels using a Test Tone" or "Adjusting the Speakers' Output Level". 7. Click the joystick. This completes adjustment to the selected speaker. 8. Repeat steps 3 - 7 for other speakers. Precaution: • Low frequency range is not output if the subwoofer is set "OFF" and the front or rear speakers set "SMALL" or "OFF". Note: • It is imperative that non-installed speakers be set to "OFF". • Set the front or rear speaker to "LARGE" if the speaker is capable of reproducing bass con- tent, or if no subwoofer is installed. • When playing a 2-channel mono source with PRO LOGIC switched ON, there are occasions when the following will occur: No audio is output if the center speaker setting is "ON" while no center speaker is installed. Audio is heard only over the center speaker if installed and the center speaker setting is "ON". 61