Pioneer 9000 Owner's Manual - Page 91
Routing the Optical Cable
UPC - 012562585574
View all Pioneer 9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
• To ensure proper heat dissipation of this product, take special care not to block the cooling fan side of this product. • Cords for this product and those for other products may be different colors even if they have the same function. When connecting this product to another product, refer to the supplied Installation manuals of both products and connect cords that have the same function. 7 Using the Corrugated Tube To prevent the optical cable from being strained, use the corrugated tube after cutting it to the correct length. • Insert the optical cable into the corrugated tube. Optical cable Routing the Optical Cable Precaution: • Try not to bend the optical cable sharply. If it is necessary to bend it sharply, make sure that the bending radius is at least 25 mm (1 inch), otherwise the cable will not transfer signals properly and so this unit will not work properly. • Route the optical cable so that nothing heavy rests on it, and so that it cannot be stepped on or caught in anything - for instance, a door. • Make a loop of diameter at least 200 mm (7-7/8 inches) with the remaining optical cable so that the cable does not get strained. • When plugging the optical cable into the unit, use the supplied cable clamps to prevent the cable from being bent sharply. • Route the optical cable so that it does not get caught in moving parts such as the gear shift, hand brake, or seat sliding mechanism. Keep the cable away from hot spots, such as near the heater outlet. Corrugated tube 7 Mounting the Clamp The clamp is used to secure the optical cable when using it. 1. Insert the clamp in the direction indicated in the figure, and turn it 90 degrees to lock. RESET Clamp 2. Secure the optical cable. RESET Installation 90