Pioneer AVH-X2700BS Owner's Manual - Page 41
System settings
View all Pioneer AVH-X2700BS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
System settings Camera View can be displayed at all times. Please note that with this setting, the camera image is not resized to fit, and that a portion of what is seen by the camera is not viewable. CAUTION Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen image may appear reversed. p Immediately verify whether the display changes to a rear view camera image when the shift lever is moved to REVERSE (R) from another position. p When the screen changes to full-screen rear view camera image during normal driving, switch to the opposite setting in "Camera Polarity". Setting rear view camera activation 1 Display the "System" setting screen. Displaying the "System" setting screen on page 40 2 Touch [Camera Settings]. 3 Touch [Back Camera Input] to switch "On" or "Off" (default). Setting the polarity of the rear view camera p This function is available when "Back Camera Input" is "On". Setting rear view camera activation on page 41 1 Display the "System" setting screen. Displaying the "System" setting screen on page 40 2 Touch [Camera Settings]. 3 Touch [Camera Polarity]. ● Battery (default): The polarity of the connected lead is positive. ● Ground: The polarity of the connected lead is negative. Setting the camera for Camera View mode To display "Camera View" at all times, "Camera View" needs to be set to "On". p To set the rear view camera for Camera View mode, set "Back Camera Input" to "On". Setting rear view camera activation on page 41 p If you use the 2nd camera, set "AV Input" to "Camera". (AVH-X5700BHS)(AVH-X3700BHS) Starting procedure (for camera) on page 39 1 Display the "System" setting screen. Displaying the "System" setting screen on page 40 2 Touch [Camera Settings]. 3 Touch [Camera View] to switch "On" or "Off" (default). If no operations are performed for seven seconds on the AV operation screen, the camera view will appear automatically. If you touch the screen while the camera view is displayed, the displayed image will turn off temporarily. When the camera view of both rear view camera and 2nd camera are available, the key to switch the display appears. Touch this key to switch the display between rear view image and 2nd camera image. Turning off the demo screen 1 Display the "System" setting screen. Displaying the "System" setting screen on page 40 2 Touch [Demo Mode] to switch "On" (default) or "Off". Selecting the system language ● If the embedded language and the selected language setting are not the same, text information may not display properly. ● Some characters may not be displayed properly. 1 Display the "System" setting screen. Displaying the "System" setting screen on page 40 2 Touch [System Language]. 3 Touch the language that you want to use. After the language is selected, the previous screen returns. Setting the keyboard language with the application for iPhone You can use the keyboard in AppRadioOne by setting the language of the keyboard for iPhone. p This function is only available in AppRadioOne on the iPhone. 1 Display the "System" setting screen. Displaying the "System" setting screen on page 40 2 Touch [Keyboard]. 3 Touch the language that you want to use. After the language is selected, the previous screen returns. Adjusting the response positions of the touch panel (touch panel calibration) If you feel that the touch panel keys on the screen deviate from the actual positions that respond to your touch, adjust the response positions of the touch panel screen. p This setting is available only when you stop your vehicle in a safe place and apply the parking brake. p Do not use sharp pointed tools such as a ballpoint or mechanical pen, which could damage the screen. p Do not turn off the engine while saving the adjusted position data. 1 Display the "System" setting screen. Displaying the "System" setting screen on page 40 2 Touch [Touch Panel Calibration]. 3 Touch two corners of the screen along the arrows, and then touch the centers of two + marks at the same time twice. 4 Press . The adjustment results are saved. 5 Press once again. Proceed to 16-point adjustment. 6 Gently touch the center of the "+" mark displayed on the screen. The target indicates the order. When you press , the previous adjustment position returns. When you press and hold , the adjustment is canceled. 7 Press and hold . The adjustment results are saved. 41