Pioneer AVH-X2700BS Owner's Manual - Page 43
System settings, Audio adjustments - usb format
View all Pioneer AVH-X2700BS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
System settings Audio adjustments 2 Touch [System Information]. 3 Touch [Firmware Information]. The "Firmware Information" screen appears. Updating firmware CAUTION ● The USB storage device for updating must contain only the correct update file. ● Never turn this product off, disconnect the USB storage device while the firmware is being updated. ● You can only update the firmware when the vehicle is stopped and the parking brake is engaged. 1 Download the firmware update files. 2 Connect a blank (formatted) USB storage device to your computer, and then locate the correct update file and copy it onto the USB storage device. 3 Connect the USB storage device to this product. 4 Turn the source off. Selecting a source on page 11 5 Display the "System" setting screen. Displaying the "System" setting screen on page 40 6 Touch [System Information]. 7 Touch [Firmware Update]. 8 Touch [Continue] to display the data transfer mode. p Follow the on-screen instructions to finish updating the firmware. p This product will reset automatically after the firmware update is completed if the update is successful. p If an error message appears on the screen, touch the display and perform the above steps again. Displaying the "Audio" setting screen 1 Press . 2 Touch , and then . The "Audio" setting screen appears. Using fader adjustment 1 Display the "Audio" setting screen. Displaying the "Audio" setting screen on page 43 2 Touch [Fader]. 3 Touch or to adjust the front/rear speaker balance. p "Front25" to "Rear25" is displayed as the front/rear speaker balance moves from the front to rear. p The default setting is "F/R 0". p Set "Front" and "Rear" to "0" when using a dual speaker system. You can also set the fader/balance by dragging the point on the displayed table. Using balance adjustment p This function is available when "Standard Mode" is selected as the speaker mode. 1 Display the "Audio" setting screen. Displaying the "Audio" setting screen on page 43 2 Touch [Balance]. 3 Touch or to adjust the left/right speaker balance. p "Left25" to "Right25" is displayed as the left/right speaker balance moves from the left to right. p The default setting is "L/R 0". You can also set the fader/balance by dragging the point on the displayed table. Switching sound muting/ attenuation You can automatically mute or attenuate the AV source volume and the iPhone application volume when the navigation outputs the guidance voice. 1 Display the "Audio" setting screen. Displaying the "Audio" setting screen on page 43 2 Touch [Mute Level]. 3 Touch the item you want to set. ● ATT (default): The volume becomes 20 dB lower than the current volume. ● Mute: The volume becomes 0. ● Off: The volume does not change. Adjusting source levels SLA (source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. p Settings are based on the FM tuner volume level, which remains unchanged. p This function is not available when the FM tuner is selected as the AV source. 1 Compare the FM tuner volume level with the level of the source you want to adjust. 2 Display the "Audio" setting screen. Displaying the "Audio" setting screen on page 43 3 Touch [Source Level Adjuster]. 4 Touch or to adjust the source volume. p If you directly touch the area where the cursor can be moved, the SLA setting will be changed to the value of the touched point. p "+4" to "-4" is displayed as the source volume is increased or decreased. p The default setting is "0". Using the auto level control This function corrects automatically the audio level difference between the music files or the sources. 1 Display the "Audio" setting screen. Displaying the "Audio" setting screen on page 43 2 Touch [Automatic Level Control]. 3 Touch the item. ● Off (default): Turns the auto level control setting off. ● Mode1: 43