Pioneer AVH-X2700BS Owner's Manual - Page 45
Switching the time alignment, preset, Using the equalizer, Adjusting the equalizer curve,
View all Pioneer AVH-X2700BS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Audio adjustments 4 Touch or to select the listening position if necessary. The following items are available: Off (default), Front, Front Left, Front Right, All. p "All" is not available when "Network Mode" is selected as the speaker mode. p If you change the listening position setting, the output levels of all the speakers will change in conjunction with the setting. 5 Touch or to input the distance between the selected speaker and the listening position. p You can input the value between 0 and 140 inch. The following speakers are available: Standard Mode: Front Left, Front Right, Rear Left, Rear Right, Subwoofer Network Mode: High Left, High Right, Mid Left, Mid Right, Subwoofer If you touch [TA On], the time alignment is turned off mandatorily. This function is available only when the listening position setting is set to "Front Left" or "Front Right". To use this function, the vehicle's acoustics must be measured in advance. Switching the time alignment preset 1 Display the "Audio" setting screen. Displaying the "Audio" setting screen on page 43 2 Touch [Time Alignment Preset]. 3 Touch the item. ● Initial (default): Sets to the initial setting value. ● ATA: Reflects the result of "A-EQ&TA Measurement" to the setting value. ● Off: Resets all setting values to 0. ● Custom: Sets to the value adjusted at "Time Alignment". p When you adjust the time alignment, the preset item will switch automatically to "Custom". p "Custom" can be selected only when the listening position is set to "Front Left" or "Front Right". Using the equalizer Recalling equalizer curves There are seven stored equalizer curves that you can easily recall at any time. Here is a list of the equalizer curves: ● S.Bass is a curve in which only low-pitched sound is boosted. ● Powerful is a curve in which low- and high-pitched sounds are boosted. ● Natural is a curve in which low- and high-pitched sounds are slightly boosted. ● Vocal is a curve in which the midrange, which is the human vocal range, is boosted. ● Flat is a flat curve in which nothing is boosted. ● Custom1 is an adjusted equalizer curve that you create. If you select this curve, the effect is applied to all AV sources. ● Custom2 is an adjusted equalizer curve that you create. If you select this curve, the effect is applied to all AV sources. p The default setting is "Powerful". 1 Display the "Audio" setting screen. Displaying the "Audio" setting screen on page 43 2 Touch [Graphic EQ]. 3 Touch the equalizer you want. Customizing the equalizer curves You can adjust the currently selected equalizer curve setting as desired. Adjustments can be made with a 13-band graphic equalizer. p If you make adjustments when a curve "S.Bass", "Powerful", "Natural", "Vocal", or "Flat" is selected, the equalizer curve settings will be changed to "Custom1" mandatorily. p If you make adjustments when the "Custom2" curve is selected for example, the "Custom2" curve will be updated. p "Custom1" and "Custom2" curves can be created common to all sources. 1 Display the "Audio" setting screen. Displaying the "Audio" setting screen on page 43 2 Touch [Graphic EQ]. 3 Select a curve that you want to use as the basis of customizing. 4 Touch the frequency for which you want to adjust the level. p If you trail a finger across the bars of multiple equalizer bands, the equalizer curve settings will be set to the value of the touched point on each bar. Using the auto-adjusted equalizer You can set the auto-adjusted equalizer to suit the vehicle's acoustics. To use this function, the vehicle's acoustics must be measured in advance. Adjusting the equalizer curve automatically (Auto EQ) on page 45 p To manually adjust the equalizer curve, set "Auto EQ&TA" to "Off". 1 Display the "Audio" setting screen. Displaying the "Audio" setting screen on page 43 2 Touch "[Auto EQ&TA] to switch "On" or "Off" (default). Adjusting the equalizer curve automatically (Auto EQ) By measuring the vehicle's acoustics, the equalizer curve can be adjusted automatically to suit the vehicle interior. WARNING A loud tone (noise) may be emitted from the speakers when measuring the vehicle's acoustics. Never perform Auto EQ measurement while driving. CAUTION ● Thoroughly check the conditions before performing Auto EQ, as the speakers may be damaged if this is performed under the following conditions: ● When the speakers are incorrectly connected. (For example, when a rear speaker is connected as a subwoofer output.) ● When a speaker is connected to a power amp delivering output higher than the speaker's maximum input power capability. ● If a microphone for acoustical measurement (sold separately) is not placed in an appropriate location, the measurement tone may become loud and measurement may take a long time, resulting in battery drainage. Be sure to place the microphone in the specified location. 45