Pioneer AVIC-88DVD Other Manual - Page 11

ENGLISH ESPAÑOL DEUTSCH This product Power cord Note: Cords for this product and those for other products may be different colors even if they have the same function. When connecting this product to another product, refer to the supplied Installation manuals of both products and connect cords that have the same function. Black, Orange/white, Red, Yellow ☞ See Page 11. Yellow/black When combining this navigation unit with a Pioneer vehicle stereo, if the vehicle stereo has yellow/black leads, connect them to those leads*. In this way, when the guidance audio is output and when you operate the system by voice, the vehicle stereo is automatically muted to reduce the vehicle stereo volume. *: If you plan to combine the Pioneer AV Head Unit (e.g. AVH- P6600DVD, AVH-P7500DVD, AVH-P6500DVD), do not connect these leads to the AV Head Unit. Purple/white (REVERSEGEAR SIGNAL INPUT) This is connected so that the navigation system can detect whether the vehicle is moving forwards or backwards. Connect the purple/white lead to the lead whose voltage changes when the shift lever is put in reverse. Unless connected, the sensor may not detect your vehicle traveling forward/backward properly, and thus the position of your vehicle detected by the sensor may be misaligned from the actual position. Connection method Clamp the backup lamp lead. Clamp firmly with needle-nosed pliers. Note: When you use the ND-PG1 speed pulse generator (sold separately), please make sure to connect it. Fuse resistor Reversing lamp lead FRANÇAIS ITALIANO NEDERLANDS Check the position of your vehicle's reversing lamp (the one that lights up when the shift lever is in reverse [R]) and find the reversing lamp lead in the trunk. 10