Pioneer AVIC-88DVD Other Manual - Page 26
Installing the Steering remote control
View all Pioneer AVIC-88DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Installation Installing the Steering remote control Parts supplied Steering remote control Lithium battery (CR2032, 3 V) Holder Belt (2 pcs.) Loading the battery Remove the battery cover, and insert a lithium (CR2032, 3V) battery. For details, see "Hardware Manual". • Avoid installing the remote control in such a location where the operation of safety devices such as airbags is prevented by the remote control. Otherwise, there is a danger of a fatal accident. • Avoid installing the remote control in such a location where the operation of the steering wheel and the gearshift lever may be prevented. Otherwise, it may result in a traffic accident. • Installation of the remote control requires specialized skills and experience. Installation of the remote control should be entrusted to a dealer from whom you purchased this unit. • Install the remote control using only the parts supplied with this unit. If other parts are used, the remote control may be damaged or could dismount itself, which leads to an accident or trouble. • Install the remote control as required by this manual. Failure to do so may cause an accident. • Do not install the remote control near the doors where rainwater is likely to be spilled on the unit. Incursion of water into the unit may cause smoke or fire. • Fix the remote control securely to the steering wheel with the belt attached to the unit. If the remote control is loose, it disturbs driving stability, which may result in a traffic accident. • Do not attach the remote control to the outer circumference of the steering wheel. Otherwise, it disturbs driving stability, causing a traffic accident. Always attach the remote control to the inner circumference of the steering wheel as shown. 25