Pioneer AVIC-D2 Owner's Manual - Page 105
Selecting the video of rear dis, Switching the dimmer setting - rear view camera
View all Pioneer AVIC-D2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
AV setting, the camera image is not resized to fit, but that a portion of what is seen by the camera is not viewable. • Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise screen image may appear reversed. • Immediately confirm whether the display changes to a rear view camera image when the shift lever is moved to REVERSE (R) from another position. • When the whole screen changes to a rear view camera image during normal driving, switch to another setting. ❒ Rear View can be displayed at all times (e.g. when monitoring an attached trailer, etc.) as a split screen where map information is partially displayed. Please be aware that in this setting, camera image is not resized to fit, but that a portion of what is seen by the camera is not viewable. ❒ Initially, this function is set to OFF. 1 Touch "CAMERA" in the SETUP menu. 2 Touch "CAMERA" to turn rear view cam- era setting on. Touching "CAMERA" switches between "ON" and "OFF". ❒ Unless this setting is "ON", you cannot switch to Rear View mode. 3 Touch "POLARITY" to select an appropri- ate setting for polarity. Each time you touch "POLARITY" switches between the following polarity: • BATTERY - When the polarity of the con- nected lead is positive while the shift lever is in the REVERSE (R) position • GND - When the polarity of the connected lead is negative while the shift lever is in the REVERSE (R) position Selecting the video of rear display When the navigation screen is displayed on front, you can select to show either the navigation screen or the selected source on the rear display. ❒ The map screen navigation images output to the rear display differ from standard NTSC format images. Therefore, their quality will be inferior to the images that appear on the front display. 1 Touch "REAR DISP" in the SETUP menu. Each touch of the "REAR DISP" changes the settings as follows: • SOURCE - Display the video of the selected source on rear display • NAVI- Display the navigation video on rear display when the navigation screen is displayed on front ❒ When selecting "SOURCE" in "REAR DISP", when the selected source have not the visual image, nothing is displayed on rear display. ❒ When selecting Rear View in the map display, nothing is displayed on the rear display. Switching the dimmer setting To prevent the display from being too bright at night, the display is automatically dimmed when the vehicle's headlights are turned on. Also, you can set the display to be dimmed as the surroundings become darker. 1 Touch "DIMMER" in the INITIAL menu. Touching "DIMMER" switches between "AUTO" and "ILLUMI" When the setting is "ILLUMI", the display is automatically dimmed when the vehicle's headlights are turned on. When the setting is "AUTO", the display is dimmed as the surroundings become darker. ❒ Covering the ambient light sensor while operating the navigation system buttons can inadvertently cause the LCD screen to grow dark. To correct this, set the "DIMMER" to "ILLUMI". Other Functions Chapter 8 Customizing the Audio Source Setting 103