Pioneer AVIC-D2 Owner's Manual - Page 64
Correcting the Installation, Angle
View all Pioneer AVIC-D2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
NAVI (5) Power Voltage The power supply (reference value) provided from the vehicle battery to the navigation system is shown. If the voltage does not fall within the range of 11 to 15V, check that power cable connection is correct. (6) Illumination When the headlights or small lamps of a vehicle are on, "On" is displayed. (If the orange/ white lead is not connected, "Off" appears.) (7) Back Signal When the gear lever is shifted to "R", the signal switches to "High" or "Low". (Which of these is displayed depends on the vehicle.) Correcting the Installation Angle You can correct the installation angle of the navigation system. Correcting the installation angle improves the accuracy for sensor learning, even if the unit is not facing center. Select the orientation of the LCD panel from the left, center, and right. 1 Touch "Settings" in the Main menu, then touch "System Options". 2 Touch "Installation Angle Setup". 3 Check the direction the LCD panel faces, and touch the corresponding item. Facing Left : Select this when the angle is 5° or more to the left from the center. Facing Center : Select this when the angle is less than 5° to the left, and 5° or more to the right from the center. Facing Right : Select this when the angle is 5° or more to the right from the center. ❒ If the sensor status is "Simple hybrid", the installation angle can be corrected. Editing the Navigation Utilities Chapter 4 62